Duality SE Operator's Manual - Solid State Logic

Console OperationsMonitor OptionsA wide range of monitor options are available via the soft keys and associated display on the monitor panel. Pressing theMOnItOr OptIOns button above the display produces the following choices; press the button below an entry toselect that option.Ins — Switches the 5.1 encoder/decoder insert into the EXT A monitor path as described on the previous page.pFM — Routes the PFL signal to the Mini A or B loudspeakers. In this mode, PFL level is controlled by the PFL level controlonly — the Main and Mini monitor level controls have no effect.sra — Both sets of Main speaker outputs are capable of handling six channels. If you are mixing in 5.1 and the client turnsup with an alternative set of ‘front’ (LCR) speakers only, the surround feeds may be locked to the Main 5.1 (Main A) outputsby selecting the sra (‘Surround on A’) function. This allows you to switch to the alternative LCR speakers, connected tothe alt 5.1 (Main B) output, and still maintain full surround monitoring. A further option (a2B — see next page) enablesthe subwoofer output to be included in this arrangement.lra — Similar to the sra function except that the LCR monitor feeds are locked to the Main A outputs but an alternativeset of surround speakers may be selected by switching to the Main B output. This can be useful in rooms that work on bothmusic, using full bandwidth separate surround speakers, and film using multiple lower powered surround speakers.Bass ManagementBass — Selecting this option produces a further layer of bass management options (see following pages for options heldunder Cal):80H — Inserts a 7th order, 80Hz, low pass filter into the LFE monitor bus, to deal with listening to 5.1 material that hasa full range, unfiltered, LFE channel.2-26 Duality se V3 Operator’s Manual