Duality SE Operator's Manual - Solid State Logic

More documents

Recommendations

Info

automationTo set up MMC locates, select the Machine Control tab in setup / peripherals:Enable MIDI Machine Control and select the Port on the MIDI Interface that is connected to Duality SE’s Port 8 MIDI IN.Leave the ID as 127 (this sends to all connected devices).Now go to setup / preferences and enable the top two options in the left-hand list. This ensures that the MMC locatemessages are transmitted correctly from Pro Tools:5-24 Duality se V3 Operator’s Manual
automationFinally, in setup / preferences:When mixing with Duality SE, it is advisable to enable the first two options in the left-hand list (see above). This ensuresthat a Rollback will occur following a locate or rewind operation in Pro Tools. If these options are not enabled, then ProTools does not send a locate command following a Stop command even though the desk counter will show the positionthat Play last occurred from, and where Play will resume from. The automation Rollback will then occur when the systemis returned to play, which can be disconcerting. Enabling the option ensures that Rollbacks occur prior to entering Play butat the expense of defeating the Pro Tools feature of automatically returning to the last Play position following the Stopcommand.Please note:• If you are not connecting via Ethernet the standard MIDI port 8 can be used.Duality se V3 Operator’s Manual5-25
Page 1:
Solid State LogicS O U N D V I S I
Page 4 and 5:
Manual ContentsFader Grouping 2-12F
Page 6 and 7:
Manual ContentsWorking with DaW aut
Page 8 and 9:
Manual ContentsseCtiOn 6: reMOte Br
Page 10 and 11:
This page is intentionally almost b
Page 12 and 13:
IntroductionThis page is intentiona
Page 14 and 15:
IntroductionCreative Versatility•
Page 16 and 17:
IntroductionThis page is intentiona
Page 18 and 19:
Page 20 and 21:
Console OperationsThis page is inte
Page 22 and 23:
Console OperationsSignal Processor
Page 24 and 25:
Console Operationsan Introduction t
Page 26 and 27:
Console OperationsAbove each bay of
Page 28 and 29:
Console Operationsrel/HOlD — This
Page 30 and 31:
Console OperationsChannel Output (C
Page 32 and 33:
Console OperationsChannel panAt the
Page 34 and 35:
Console OperationsMaster Channel Fa
Page 36 and 37:
Console OperationsTo edit any exist
Page 38 and 39:
Console Operations12342-16 Duality
Page 40 and 41:
Console OperationsCentral routing p
Page 42 and 43:
Console OperationsMain Output Funct
Page 44 and 45:
Console OperationsMaster FaderThe m
Page 46 and 47:
Console OperationsIf either MInI a
Page 48 and 49:
Console OperationsMonitor OptionsA
Page 50 and 51:
Console OperationsMonitor speaker C
Page 52 and 53:
Console OperationsMonitor level Dis
Page 54 and 55:
Console OperationsCue/Fx send Maste
Page 56 and 57:
Console OperationsMisc OptionsA num
Page 58 and 59:
Console OperationsThe following opt
Page 60 and 61:
Console OperationsMix reassign Matr
Page 62 and 63:
Console OperationsCentre section Me
Page 64 and 65:
Console Operationssetup MenuThe cen
Page 66 and 67:
Console OperationsDaw setupThe next
Page 68 and 69:
Page 70 and 71:
DaWplug-In editor 3-33Plug-In Edito
Page 72 and 73:
DaWThis page is intentionally almos
Page 74 and 75:
DaWConsole FocusThe console can be
Page 76 and 77:
Page 78 and 79:
DaWConnecting via physical MIDI por
Page 80 and 81:
DaWsetting your workstation(s) to c
Page 82 and 83:
DaWlogic pro 8When Logic is assigne
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
DaWDaW utility Buttons (9)This grou
Page 90 and 91:
Page 92 and 93:
DaWChannel solo and Cut panelsChann
Page 94 and 95:
DaWselect ModeWith the sel button (
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
DaWOther useful transport modesHalf
Page 102 and 103:
DaWselection Mode (Zoom/sel button
Page 104 and 105:
Page 106 and 107:
DaWselecting a DaW Channel for plug
Page 108 and 109:
DaWComparing your ChangesPressing t
Page 110 and 111:
DaWedit tools MenuEdit Tools (edts)
Page 112 and 113:
Page 114 and 115:
DaWautomation status DisplayPressin
Page 116 and 117:
Page 118 and 119:
DaWThe majority of DAW functions ar
Page 120 and 121:
DaWthe logic templateDuality SE emu
Page 122 and 123: DaWnuendo/Cubase templateAs with ot
Page 124 and 125: DaWDuality se’s nuendo Control sc
Page 126 and 127: DaWCHannel is unchanged and assigns
Page 128 and 129: DaWThe Transport Control buttons ar
Page 130 and 131: This page is intentionally almost b
Page 132 and 133: total recallThis page is intentiona
Page 136 and 137: total recalltOtal reCall anD prOjeC
Page 138 and 139: total recallrecalling a tr setupWit
Page 140 and 141: total recallresettInG COntrOlsautom
Page 146 and 147: automationThis page is intentionall
Page 148 and 149: automation5-ivDuality se V3 Operato
Page 152 and 153: automationworking with projects and
Page 156 and 157: automationCreating a new Mix passTo
Page 158 and 159: automationMix runningPress play on
Page 160 and 161: automationJoin and reviseAt any tim
Page 162 and 163: automationprotection ModesEach comp
Page 164 and 165: automationswitch automationPressing
Page 166 and 167: automationtrim lokTrim Lok (only av
Page 168 and 169: automationCopy and swapCopy and Swa
Page 170 and 171: automationautomation setup OptionsT
Page 176 and 177: automationsetup GuidelinesFor A-FAD
Page 182 and 183: emoteThis page is intentionally alm
Page 186 and 187: emoteConnecting Duality se to the C
Page 188 and 189: emoteBacking up a projectTo create
Page 190 and 191: emotetOtal reCall taBHere you can r
Page 192 and 193: emoteexternals taBThis page allows
Page 198 and 199: Block DiagramsThis page is intentio
show all

Duality SE Operator's Manual - Solid State Logic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?