Duality SE Operator's Manual - Solid State Logic

automationJoin and reviseAt any time during Mix Review, the JOIn button can be used to switch all channels that were in Write at the last rollbackpoint, back into Write at the levels or state they were at the rollback point. This is useful, for example, when balancing levelsin a chorus. Once you have achieved the right balance, simply rollback before the start of the chorus, go into Play, hit JOInat the start of the chorus and the levels will drop into Write at the level set before rollback.The reVIse button has a similar action except that all channels in Write at the rollback point are returned to Write attheir current Mix position. This is useful when you are mixing a particular section, but have made a small mistake. Justrollback before the mistake, hit reVIse and channels will immediately go into Write at the current fader level, allowingyou to overwrite the mistake.Here is an exaggerated graphic representation of both functions:Multiple rollback memories are supported so that successive operations of JOIn or reVIse can return different sets offaders back to Write, if multiple rollbacks have taken place:To return all faders to Absolute, use the JOIn or reVIse buttons until the ‘global’ rollback memory is reached, at whichpoint all faders will return to Write either at their current position (reVIse), or at the levels they had at the globalrollback point (JOIn).5-12 Duality se V3 Operator’s Manual