Duality SE Operator's Manual - Solid State Logic

Console OperationsFader linksFader Links are a useful method of ganging channels without the complexity of a Master/Slave style grouping system. Witha Fader Link, any fader or non-latching switch operation can be applied to all the channels in the link.Faders retain any existing level offsets, provided no fader in the link reaches the upper or lower extremes of the faderscale. If any member of a link reaches the end of its physical travel, no member of the link can move beyond this point. Toaccess Fader Links, press the lnks soft key next to the auto key.Creating a new linkTo set up a new link, scroll to new link and press the V-pot push switch. This will create a new entry in the list suffixedwith a number. This entry will be automatically highlighted, and faders can be added to (or removed from) the link bypressing their fader status buttons (shown on the following page). Link numbers are shown in the fader scribble strip andthe red fader status LEDS will indicate those faders in the currently selected link.While the Fader and Cut and sOlO switches are always included in Fader Linking, it is possible to exclude the remainingautomated channel switches (Cue and FX on, Insert In, EQ In) from the Link: with a fader link highlighted in the lnks page,press the Chsws softkey. When switches are included in the Link, switches linked is displayed after the fader linkname on the screen (as shown for Link 2 above).To adjust balance of a link, hold one fader whilst moving another. This automatically isolates the second fader from the linkwhilst the remaining faders continue to track the first fader touched.When the Links page is not active, pressing the sHOw lInKs button to the left of the Eyeconix button causes the Linksto be displayed in the Scribble Strip.The SHOW LINKS button is automatically selected when the Links page is active.As far as the automation system is concerned (see Section 5), switch and fader operations performed in one channel willcause that function in every channel in the link to go into Write. Links can be dissolved at any time, but all the automationdata will still play out correctly.Duality se V3 Operator’s Manual2-13