Duality SE Operator's Manual - Solid State Logic

DaWCHannel FunCtIOnsIn DAW focus mode, the channel meters, faders and part or all of the Solo and Cuts panels control the DAW and displayits status.DaW MetersIn DAW focus mode, Duality SE’s channel meters flip to a stereo mode to indicate the level of theDAW signal path. Mono tracks are displayed on the left meter only. When a signal reaches 0dBFs,the corresponding OVl tally will light to indicate that the DAW signal level has clipped.The meters duplicate the function of meters within the DAW, and show the same information. Theyalso follow DAW pre or post fader meter settings, as set within the DAW.OVL tallies can be reset using the F1 function in the Fkys soft key menustatus IndicatorsThe meter shows the status of the corresponding DAW track.reC flashes when the track is in record ready and lights when the track is in record.eDIt indicates that the track is selected for editing with the plug-in controller.Multi-channel Metering (tDM systems Only)Multi-channel metering can be displayed by pressing OptIOn + sOlO on a selected multi-channel track. The next twostereo meters are used to show the additional information. Normal metering functionality resumes after deselecting thesOlO function.Channel FaderThe channel fader can control any virtual DAW fader including Channel, Master, Auxiliary, MIDI tracksor Instrument tracks. The calibration of the fader will depend upon the DAW (please refer to yourDAW manual for more details). Pressing alt will display the gain of the DAW fader on the faderscribble strip when you move the fader.Fader groupingChannel faders will follow any grouping enabled within the DAW. Faders can be disengaged from afader group simply by holding down the Ctrl button or by touching one fader in a group whileadjusting another fader’s level. Relative fader levels are maintained upon release of the fader.Duality se V3 Operator’s Manual3-19