Duality SE Operator's Manual - Solid State Logic

DaWComparing your ChangesPressing the COMpare button allows you to compare any changes made to plug-in parameters with the values storedbefore editing. As soon as you change any parameter the COMpare box will turn yellow. Pressing the COMparebutton toggles between the settings when you starting editing parameters and the current settings.Note that the plug-in window must be opened before this function becomes available.Bypassing plug-insThe Bypass button allows a plug-In to be toggled in/out of the signal path in paraM mode. In Insert mode,individual plug-ins can be bypassed by holding down the Bypass button and pushing the V-pot that corresponds to theinsert you want to bypass. The channel sel button can be used to bypass all the plug-ins on a channel.V-pot sensitivityThe Plug-in Editor’s V-pots can be set to one of two modes: Fixed or Velocity-sensitive. In Fixed mode, turning aknob will range through the complete list of available parameters; this allows you to search through long lists very quickly.Holding down the alt button enables a finer resolution scroll function. In Velocity-sensitive mode, the speed ofscrolling is dependent upon how quickly you turn the V-pot. To toggle between the two modes press the F5 button in theFkys menu.Note that the channel V-pots only operate in Fixed mode.3-36 Duality se V3 Operator’s Manual