Duality SE Operator's Manual - Solid State Logic

total recallworking with projects and titlesAt least one Project and Title must be present before you can store a TR Setup. Select ssl followed by proj. Now selectnew proj and the system will automatically create a new Project and Title; logically these will be named Project 1 andTitle 1 (if no previous projects exist).If Projects have been previously created, when you press the proj key, the screen will display a list of existing Projects. Usethe lefthand encoder to scroll through the list and when you find the Project you require, press the encoder switch (or softkey below the encoder) that represents the select function. This makes that Project current (as indicated by the entrybeing highlighted in yellow, with the word selected after its name) and reveals the Titles in that Project. To create a newTitle in a Project, select new title. Titles and Projects are automatically numbered in sequence of creation. Select Copytitle to copy the selected Title.Note that the top line of the display always indicates the current Project and current Title. Use the select rotary controlto scroll through lists of Projects, Titles, etc., and the encoder switch to select them. To return at any time to the Projectlist, press the soft key for Back.saving a tr setupOnce a new Title has been created, or a previous Title is selected, press TR followed by Store and the current consolesettings will be saved in the next available TR Setup. New Setups are automatically named ‘TR - n’ where ‘n’ starts at ‘1’. Ifa Setup is deleted (see below) then its number will not be re-used. The only exception to this is if all Setups are deleted;the numbering will then restart from ‘1’. Setups are saved to Duality SE’s flash memory. They can be backed up as part ofa console Project – see Section 6Duality se V3 Operator’s Manual4-3