Duality SE Operator's Manual - Solid State Logic

DaWDuality se nuendo Control Button layoutThe majority of Nuendo or Cubase functions are controlled via dedicated buttons, with virtually no reliance on the 8 x 8menu buttons located beneath the TFT screen. Full details are available in the Mackie Control manual, which is available fromthe Nuendo download site.When compared to the HUI protocol front panel, the major differences here are the new control set for assigning processingparameters to the V-pots. Up and down page buttons for V-pot parameters are located within the Shift button block. Therotary encoder will also output page up/down commands when turned left or right.rDy and sel control the function of the channel sel buttons as with the HUI interface. The eDIt button is used toopen editing windows in Nuendo or Cubase for the current selection. Pressing eDIt together with sHIFt will close anactive window.CHannel is unchanged and assigns Duality SE’s channel gain element or DAW channel to the V-pot according to thestate of the Console Focus button. The encoder switch is used to ‘flip’ parameters onto the faders as before but includesall processing parameters, not just send levels.The Transport Control buttons are assigned to related transport functions as with the HUI interface:Only the CyCle and punCH functions have tallies.Duality se V3 Operator’s Manual3-51