Duality SE Operator's Manual - Solid State Logic

Console Operationstalkbacktalkback switches:listen switch:red light switch:tB switches disable listen:tB to FB:Select the operation of the talkback buttons: Momentary / Latching / Auto(Play) / Auto (Record).Select the operation of the Listen buttons: Latching / Auto (Play) / Auto(Record).Select the operation of the Red Light switch: Manual / Auto (Play) / Auto(Record).This allows the Listen function to be switched off when talkback is activated,thus avoiding feedback problems.(Sums / Replaces) When assigning talkback to foldbacks, this option defineswhether talkback sums with or replaces the normal foldback signal.See Communications for more details of these optionsMonitor sectionMonitor Gain Display:Monitor set Cal level:The calibration of the main monitor Gain pot and display can be set to oneof three industry-standard monitoring modes: Music (Off to 11) / Film (Offto 95dB) / Gain (Off to 0dB)When in Film monitoring mode, the calibrated listening level can be adjusted:70 – 90 (dB).See Monitor Level Display and Calibrated listening level for more details of these optionssolo Gain boost:Isolated channels aFl on solo:Desk setupstereo Mix Insert ModeInput Cut enableanalogue Meter scalingWhen auditioning signals which are low in the mix, it is possible to boost thesolo bus signal level. (Range: 0 – 10dB).Set solo-isolated channels to automatically solo in AFL (ON/OFF).This enables the stereo mix matrix ‘SUM’ option to be selected, where theinsert return sums with the main signal path. Select REPLACE to disable thisfunction.If set ON, the channel strip Cut button will cut prefade sends, ie. Aux andCHOP sends (ON / OFF).Set the analogue level corresponding to 0dB FS on the console meters.(Range 18, 20, 22, 24 dBu).Duality se V3 Operator’s Manual2-43