Duality SE Operator's Manual - Solid State Logic

emoteseCtIOn 6: DualIty reMOteIntrODuCtIOnThe Duality SE console allows the use of a remote browser which provides a one-stop external solution for archiving andretrieval of automation and Total Recall data along with session management functions. Users can also use this applicationto add Eyeconix images to their consoles TFT screens, allowing at a glance identification of track sources.COnfIgurIng the DualIty reMOteFirst download and install the Duality Remote application to the Mac or PC you intend to manage your Duality SE from.Installing the applicationIf you do not yet have the Duality Remote application for Duality SE, you can download it from the SSL website:www.solidstatelogic.com/music/duality/downloads.aspNote that you must be registered to enter this area.The files are listed under Duality Java applications. There are separate files for PC and Macintosh computers – thePC version is a .zip archive, so simply double click to unzip it; the Macintosh version is a .dmg file, which can be extractedby double clicking also.Once successfully unpacked you should then have a stand alone Java application called ‘solid state logic Duality’.a note On JavaThe Duality Remote application is Java based and compatible with Mac OS 10.4 and above and Windows 2000, XP and above.If you do not have Java on your computer then please visit and download it from: www.java.comThe Remote requires Java Runtime Environment Version 5.0, or above.The above URL will also verify your computer’s currently installed Java environment.The console normally expects to obtain an IP Address from a DHCP server. The computer and console should thereforebe connected to a network with a DHCP server. If you wish to use a fixed IP address, go to ssl / Misc / net and selectthe fixed softkey. The fixed address can be changed using the terminal diagnostic port on the rear of the console. See thefollowing page for details.Duality se V3 Operator’s Manual6-1