Duality SE Operator's Manual - Solid State Logic

automationprO tOOls setup nOtesTo set up timecode generation, go to setup / session and select the MTC option:Now go to setup / peripherals and select the synchronisation tab. Select the port on the MIDI interface that isconnected to Duality SE’s physical MIDI port 8 or select ipMIDI Port 14. Also select the timecode rate for the session andthe session start time.The automation system automatically detects the timecode standard from the incoming MTC messages but willquite happily attempt to play out stored mix data to incoming timecode with a different frame rate. This will resultin small but potentially annoying timing errors in automation playback as well as missing data if 25 frame timecodeis used to play back a Mix recorded with 30 frame timecode.Duality se V3 Operator’s Manual5-23