Duality SE Operator's Manual - Solid State Logic

automationautomation setup OptionsThe following entries in the ssl / Misc / setup menu are used to configure automation operations:Glide frames: Sets the ramp time in frames for the automation SNAP mode. (range 0 – 255)rollback threshold frames: Sets the number of consecutive, decrementing frames that the system needsto see to determine if a Rollback has taken place. The range is 0 – 10; thedefault is 0 frames. Increase as required if a Rollback occurs when you stopthe timecode master.Setting the threshold to 0 means that mix data can be entered in non real timeby setting the DAW nudge value to a frame, and using the nudge forwardcommand to step through the mix whist moving a fader or operating switchfunctions. A reverse nudge command will automatically force a rollback,returning the mix pass status to Mix Review and incrementing the rollbackcounter.In Mix show:When using the automation, you have a choice of what is displayed onthe consoles channel scribble strips (and below the Group and Master faderlevels in the Centre Section TFT screen). The choices are:Automation Mode: displays the status of the faders – Auto, Safe or Manual;Channel names in Mix running: displays the channel names once execute ispressed in automation,Channel names: displays the channels names regardless.Mix update Mode: Sets the default automation mode at the start of an update Mix (Replay /Absolute / Trim).automated switches turn off on: Select whether the off function of automatable switches is sent on the downpressor release of the button (Press / Release).5-22 Duality se V3 Operator’s Manual