Duality SE Operator's Manual - Solid State Logic

DaWthe Default Button (7)Faders, pans and sends can be reset to their default values using the DeFault button:resetting pansSelect the pan button on the Master Control Panel, and all Duality SE’s V-pots become pan controls. Hold the DeFaultbutton while pressing the V-pot on the channel you wish to reset. Hold down OptIOn and press DeFault followedby the V-Pot switch to perform a reset across all pans.resetting FadersHold the DeFault button while pressing the sel (Select) button on the channel you wish to reset. Hold selOptIOn and press DeFault followed by the SEL switch to perform a reset across all faders.resetting sendsSelect the senD button on the Master Control Panel. Turn the Master V-pot to scroll through the list of available sends.Hold the DeFault button while pressing the channel V-pot on the channel you want to reset. Hold down OptIOnand press DeFault followed by the V-Pot switch to perform a reset across all sends.resetting plug-insHold the DeFault button and press the Plug-In Editor COMpare function. The plug-in default value is either thefactory setting or user setting determined within the DAW.Duality se V3 Operator’s Manual3-17