Duality SE Operator's Manual - Solid State Logic

automationCreating a new Mix passTo create a new automated Mix Pass, enter the List Mix menu (shown below) and use the left-hand encoder to highlightthe new Mix entry.Now press the encoder switch or the select soft key to select the New Mix Setup page.All the channel faders will enter Absolute mode, as indicated by a red LED next to each fader. Depending on the showchannel names option selected in the ssl / Misc / setup menu (see automation setup Options), the currentautomation status for each fader may be displayed in the scribble strip above the fader, replacing the standard ‘Fader nn’label.Select protect to disconnect controls from the automation system – see below for more details.automated mode:Manual mode:Red LED. All automated moves are written at the current fader position.No LEDs. The fader operates as a monitor fader only, ie. no information will be written tomemory.Pressing the CanCel button (in the ‘AUTOMATION’ group above the ‘TRANSPORT’ buttons) twice quickly will returnyou to the List Mix page. See Dedicated automation Buttons for more information.5-8 Duality se V3 Operator’s Manual