Duality SE Operator's Manual - Solid State Logic

Console Operationssetup MenuThe centre section TFT screen provides access to a setup menu that holds a number of useful console-related items. Selectssl followed by Misc and then setup (see Section 3 if you are not familiar with the use of the TFT and its associatedsoft keys).To change a setting, use the left hand V-pot to select the item, then press the V-pot to enter adjustment mode. Turn theV-pot to the desired setting and press it a second time to save the setting to non-volatile memory.The setup options are as follows:automationGlide frames: Sets the ramp time in frames for the automation SNAP mode. (range 0 – 255)rollback threshold frames: Sets the number of consecutive frames that the system needs to see todetermine if a Rollback has taken place. The range is 0 – 10; the default is 0frames. Increase as required if a Rollback occurs when you stop the timecodemaster.Setting the threshold to 0 means that mix data can be entered in non real timeby setting the DAW nudge value to a frame, and using the nudge forwardcommand to step through the mix whist moving a fader or operating switchfunctions. A reverse nudge command will automatically force a rollback,returning the mix pass status to Mix Review and incrementing the rollbackcounter.In Mix show:When using the automation, you have a choice of what is displayed on theconsoles channel scribble strips (and below the Group and Master fader levelsin the Centre Section TFT screen). The choices are:Automation Mode: displays the status of the faders – Auto, Safe or Manual;Channel names in Mix running: displays the channel names once execute ispressed in automation,Channel names: displays the channels names regardless.Mix update Mode: Sets the default automation mode at the start of an update mix (Replay /Absolute / Trim).automated switches turn off on**:Select whether the off function of automatable switches is sent on the downpressor release of the button (Press / Release).GroupingFader Grouping Mode:Group lockout level:** Only displayed if the DualitySE software features have been enabledSelects the fader grouping mode (Servo / VCA). (See Group ControlFaders for more details).Set the group master level below which slave faders cannot have their balancealtered (available in Servo grouping mode only). The lockout level rangeis –35dB to –70dB or OFF.2-42 Duality se V3 Operator’s Manual