12.07.2015 Views

Lists 11/2003 Edition

Lists 11/2003 Edition

Lists 11/2003 Edition

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Contents <strong>11</strong>.033 Variables..................................................................................................................... 3-3313.1 Introduction....................................................................................................3-3343.1.2 Module types ...................................................................................... 3-3363.1.3 Variable types ...................................................................................... 3-3393.1.4 Data types ...................................................................................... 3-3413.2 System data ..................................................................................................3-3433.2.1 Area N, Mod. Y: Global system data....................................................... 3-3433.2.2 Area C, Mod. Y: Channel-specific system data ...................................... 3-3523.2.3 Area N, Mod. PA: Global protection zones ............................................. 3-3573.2.4 Area C, Mod. PA: Channel-specific protection zones ............................. 3-3643.2.5 Area N, Mod. YNCFL: NCK instruction groups ....................................... 3-3713.3 State data of system......................................................................................3-3723.3.1 Area N, Mod. S: Global state data .......................................................... 3-3723.3.2 Area N, Mod. SALA: Alarms: List organized according to time,oldest alarm appears first ....................................................................... 3-3893.3.3 Area N, Mod. SALAP: Alarms: List organized according to priority ........ 3-3913.3.4 Area N, Mod. SALAL: Alarms: List organized according to time,most recent alarm appears first .............................................................. 3-3933.3.5 Area N, Mod. SMA: State data: Machine axes ....................................... 3-3953.3.6 Area N, Mod. SEMA: State data: Machine axes (extension of SMA) ..... 3-3973.3.7 Area N, Mod. SSP: State data: Spindle .................................................. 3-4163.3.8 Area N, Mod. SSP2: State data: Spindle ................................................ 3-4193.3.9 Area N, Mod. FA: Global NCU active frames ......................................... 3-4223.3.10 Area N, Mod. FB: Global NCU base frames ........................................... 3-4233.3.<strong>11</strong> Area N, Mod. FU: Global NCU settable frames ...................................... 3-4243.3.12 Area N, Mod. YFAFL: NCK instruction groups (Fanuc) .......................... 3-4253.3.13 Area B, Mod. S: Mode-group-specific state data .................................... 3-4263.4 State data of channel ....................................................................................3-4273.4.1 Area C, Mod. M: Channel-specific machine data ................................... 3-4273.4.2 Area C, Mod. S: Channel-specific status data ........................................ 3-4283.4.3 Area C, Mod. SINF: Part-program-specific status data .......................... 3-4553.4.4 Area C, Mod. SPARP: Part program information.................................... 3-4583.4.5 Area C, Mod. SPARPP: Program pointer in automatic operation........... 3-4623.4.6 Area C, Mod. SPARPI: Program pointer on interruption......................... 3-4653.4.7 Area C, Mod. SPARPF: Program pointer for block search..................... 3-4673.4.8 Area C, Mod. SSYNAC: Synchronous actions........................................ 3-4693.4.9 Area C, Mod. SYNACT: Channel-specific synchronous actions............. 3-4723.4.10 Area C, Mod. SNCF: Active G functions ................................................. 3-4733.4.<strong>11</strong> Area C, Mod. NIB: State data: Nibbling................................................... 3-4753.4.12 Area C, Mod. FB: Base frame................................................................. 3-4773.4.13 Area C, Mod. FS: System Frame............................................................ 3-4783.5 Axis status data.............................................................................................3-4793.5.1 Area C, Mod. SMA: State data: Machine axes ....................................... 3-4793.5.2 Area C, Mod. SEMA: State data: Machine axes (extension of SMA) ..... 3-4813.5.3 Area C, Mod. SGA: State data: Geometry axes in tool offset memory... 3-5003.5.4 Area C, Mod. SEGA: State data: Geometry axes in tool offsetmemory (extension of SGA) ................................................................... 3-5033.5.5 Area C, Mod. SSP: State data: Spindle .................................................. 3-5093.5.6 Area C, Mod. SSP2: State data: Spindle ................................................ 3-5133.5.7 Area C, Mod. FU: User frames ............................................................... 3-517x© Siemens AG, <strong>2003</strong>. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 6<strong>11</strong> digital <strong>Lists</strong> (LIS) – <strong>11</strong>.03 <strong>Edition</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!