Lists 11/2003 Edition

Overview of FunctionsSINUMERIK CNC Controlsn Basic versionv Optionx Function dependent on operating softwarec Precondition: HMI Advanced operating software– Not possibleEmpty field: Function not dependent on operating softwareOrder No.SINUMERIK 802802S 802C 802DPCU210■ CNC programming: Language (continued)CNC high-level language with• User variables (configurable) – – – n• Predefined user variables (arithmetic parameters),configurablenn n n nn• Read/write system variables – – – n• Indirect programming – – n n• Program jumps and branches n n n n• Program coordination with WAIT, START, INIT – – – n• Arithmetic and angular functions n n n n• Comparison operations and logic operations n n n n• Macros – – – n• Control structures(IF-ELSE-ENDIF, WHILE, FOR, REPEAT, LOOP)– – – nn• Commands to HMI – – – n• STRING functions – – – nOnline ISO dialect interpreter 6FC5 253 - 0AE00 - 0AA0 – – n nnProgram managementn• Management of programs and workpieces in NCK n n n n2) 2) 2) n• Management of programs and workpieces on hard disk (HD) – – – n• Management of programs and workpieces on floppy disk drive – – – n• Management of programs and workpieces on network drive – – – nn• Max. number of workpieces on NC/NC + HD 100/– 100/– 100/– n• Templates for workpieces, programs and INI files – – – n•Job lists – – – nn■ CNC programming: CyclesTechnological cycles for drilling/milling and turning See Part 4 or 5 n n n nnPocket milling with free contour definition and islands See Part 4 – – – nPocket milling with free contour definition, islands andresidual material removalSee Part 4 – – – nnExtended stock removal functionality with blank definition See Part 4 – – – nn1) Precondition: SinDNC (option).2) No management of workpieces.3) With different scope of functions.4) With CCU 2.1/30 Siemens NC 60 · 2002 (04.02)