12.07.2015 Views

Lists 11/2003 Edition

Lists 11/2003 Edition

Lists 11/2003 Edition

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>11</strong>.03 4 Interface Signals4.2 Signals of the PLC application interfaceNoteon Feedrate override for rapid traverse selected (DBX25.3)Depending on this signal, the basic PLC program copies the feedrate overrideonto the rapid traverse override on the channel-specific interface.On Program test selected (DBX25.7)"Program test selected" means axis disable for all channel axes and spindles.Status signals of geometry axesDBSignals from NCK channel (NCKPLC)21 - 30Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0DBB 40 Geometry axis 1DBB 41Traverse command /H1/Handwheel active /H1/plus minus 3 2 1Geometry axis 1 active machine function /H1/Var. INC 10000 INC 1000 INC 100 INC 10 INC 1 INCDBB 42 OEM signals geometry axis 1DBB 43 Geometry axis 1DBB 44MMC--> PLCDBB 46 Geometry axis 2DBB 47Traverse command /H1/Handwheel active /H1/plus minus 3 2 1Geometry axis 2 active machine function /H1/Var. INC 10000 INC 1000 INC 100 INC 10 INC 1 INCDBB 48 OEM signals geometry axis 2DBB 49 Geometry axis 2DBB 50MMC--> PLCDBB 52 Geometry axis 3DBB 53Traverse command /H1/Handwheel active /H1/plus minus 3 2 1Geometry axis 3 active machine function /H1/Var. INC 10000 INC 1000 INC 100 INC 10 INC 1 INC© Siemens AG, <strong>2003</strong>. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 6<strong>11</strong> digital <strong>Lists</strong> (LIS) – <strong>11</strong>.03 <strong>Edition</strong> 4-655

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!