Lists 11/2003 Edition

Overview of FunctionsSINUMERIK CNC Controlsn Basic versionv Optionx Function dependent on operating softwarec Precondition: HMI Advanced operating software– Not possibleEmpty field: Function not dependent on operating softwareOrder No.SINUMERIK 802802S 802C 802DPCU210■ SimulationSee Part 13Up to n channels can be simulated sequentially – – –nSeveral channels and programs can work sequentially– – – non the same blanknSimulation of program X whileprogram Y is executingDrilling/milling 1)– – – nnn• Multi-face 2D view (dynamic) – – n n2) n• 3D view (static) – – – n• Simultaneous recording (real-time simulation of current machining operation) See Part 3 or 4 – – n n2) nTurning 1)n• Travel path simulation without model (broken-line graphics) – – n n2) n• Programmable blank contour – – – n• Simulation in working plane G18 – – n n2) n• Simulation in working planes G17/G19 – – – n• Full/partial cut with circumferential edge, end and peripheral surface,milling and drilling operations– – – nn• Counterspindle – – – n• 3D simulation of finished part (static/dynamic) See Part 4 – – – nn• Simultaneous recording (real-time simulation of current machining operation) See Part 3 or 4 – – n 2)n■ Operating modesJOG n n n n• Handwheel selection n n n n• Inch/metric switchover – – n n• Safety Integrated user agreement – – – n• Manual measurement of zero offset n n n n• Manual measurement of tool offset n n n n• Automatic tool/workpiece measurement See Part 4 – – n nn• Reference point approach, automatic/via CNC program n n n nMDA n n n n• Input in text editor n n n n• Save MDA program – – – n• Input screenforms for technology and positioning,cycles support– – – nn1) Toolholder perpendicular to workpiece.2) Single-page broken-line graphics in programmed plane.3) With NCU system software 12 axes: 2.4) With PCU 50 dynamic.5) Precondition: Measuring cycles.6) With CCU 2.1/34 Siemens NC 60 · 2002 (04.02)