Lists 11/2003 Edition

11.03 3 Variables3.3 State data of system3.3.5 Area N, Mod. SMA: State data: Machine axesOEM-MMC: Linkitem/Nck/MachineAxis/...All state data that are dependent on machine movement and are definedspecifically for machine axes (geometry and special axes) are combined inmodule SMA. Supplementary information is to be found in module SEMA. Theindividual variables are defined as fields where the line index is the number ofthe machine axis (assigned to the current channel). The variable "name" inmodule SMA with the line index in question identifies the axis.The assignment of the line indices in modules SMA and SEMA is identical.actIncrValActive INC weighting of the axis0 = INC_100001 = INC_10002 = INC_1003 = INC_104 = INC_15 = INC_VAR6 = INC_JOG_CONT7 = no incremental mode set- UWordMulti-line: yes Axis index numMachAxesH1actToolBasePosTool base position. Physical unit is defined in the variable extUnit (in this module).mm, inch, Grad, userdefMulti-line: yes Axis index numMachAxesDoublecmdToolBasePosTool base position setpoint. Physical unit is defined in variable extUnit (in this module).mm, inch, Grad, userdefMulti-line: yes Axis index numMachAxesDoubleextUnitCurrent physical unit of the axis position0 = mm1 = inch2 = degree3 = indexing position4 = userdef- UWordMulti-line: yes Axis index numMachAxesnameAxis name- String[32]Multi-line: yes Axis index numMachAxes© Siemens AG, 2003. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition 3-395