Lists 11/2003 Edition

11.03 2 Machine and Setting Data2.1 Explanatory notes on the machine and setting dataOverview of machineand setting dataThe machine and setting data are divided into the following areas:TableOverview of machine and setting dataAreaDesignationFrom 1000 to 1799 Machine data for drivesFrom 9000 to 9999 Machine data for operator panelFrom 10000 to 18999 General machine dataFrom 19000 to 19999 ReservedFrom 20000 to 28999 Channel-specific machine dataFrom 29000 to 29999 ReservedFrom 30000 to 38999 Axis-specific machine dataFrom 39000 to 39999 ReservedFrom 41000 to 41999 General setting dataFrom 42000 to 42999 Channel-specific setting dataFrom 43000 to 43999 Axis-specific setting dataFrom 51000 to 61999 General machine data for compile cyclesFrom 62000 to 62999 Channel-specific machine data for compile cyclesFrom 63000 to 63999 Axis-specific machine data for compile cyclesIndex for MD and SDThe section headed INDEX contains a special index for the machine andsetting data listed in this section.Data identifiersThe designation of the machine data is displayed on the MMC. The internaldata identifier requires additional identifiers. These identifiers must be specifiedif a machine data is changed through programming or read in via the serialinterface.Data areas $MM_ Operator panel data$MN_/$SN_ General machine data/setting data$MC_/$SC_ Channel-specific machine data/setting data$MA_/$SA_ Axis-specific machine data/setting data$MD_Drive machine dataPlease note: $ System variableMMachine dataSSetting dataM, N, C, A, D Subarea (second letter)Axis data are addressed via the axis name. The internal axis designation (AX1,AX2 ... AX8) or the name specified in MD 10000: AXCONF_NAME_TAB can beused as the axis name.E.g.: $MA_JOG_VELOY1=2000The JOG velocity of axis Y1 is 2000 mm/min.The contents of a machine data must be preceded and followed by anapostrophe (e.g. ‘X1’ or ‘H41’) if they are a STRING (e.g. X1) or a hexadecimalvalue (e.g. H41).© Siemens AG, 2003. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition 2-67