Lists 11/2003 Edition

More documents

Recommendations

Info

3 Variables 11.033.7 Tool and magazine data3.7.9 Area T, Mod. TM: Magazine data: General dataOEM-MMC: Linkitem/Tool/MagazineDescription/...This module contains the information for the available tool magazines.magActPlace$TC_MAP8Current magazine positionLocation number of tool change position- UWordMulti-line: yes Magazine number numMagsMaxmagCmdCommand for magazine execution1: Find_empty location_loading2: Tool_MOVE- UWordMulti-line: yes Magazine number numMagsMaxmagCmdPar1Command parameter of the magazineIn case of a succesfull return, the return value is the magazine number.If an error occurs, an error number is set.- UWordMulti-line: yes Magazine number numMagsMaxmagCmdPar2Command parameter of the magazineIn case of a succesfull return, the return value is the place number.If an error occurs an error number is set.- UWordMulti-line: yes Magazine number numMagsMaxmagCmdStateCommand state of the magazine1: started2: running3: end correct4: end with error- UWordMulti-line: yes Magazine number numMagsMaxmagDim $TC_MAP6 FBWDimension of the magazine, number of magazine lines in the box magazineApplies to box magazines (magKind = 5) number of lines. For all other magazine types the value is 1.- UWordMulti-line: yes Magazine number numMagsMaxmagIdent $TC_MAP2 FBWIdentifier of the magazine- String[32]Multi-line: yes Magazine number numMagsMax© Siemens AG, 2003. All rights reserved3-542 SINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition
11.03 3 Variables3.7 Tool and magazine datamagKind $TC_MAP1 FBWType of the magazine1 = chain3 = revolver5 = box magazine7 = internal magazine tool buffer9 = internal magazine loading stations- 0 UWordMulti-line: yes Magazine number numMagsMaxmagLink1 $TC_MAP4 FBWChaining 1 of the magazine to the following magazine. Number to (next) background magazine. Can be used withchain, revolver and box magazines (magKind = 1,3 or 5)- -1 UWordMulti-line: yes Magazine number numMagsMaxmagLink2 $TC_MAP5 FBWChaining 2 of the magazine to the previous magazine. Backward chaining of background magazines. Can be used forchaining to chain, revolver and box magazines (magKind = 1, 3 or 5)- -1 UWordMulti-line: yes Magazine number numMagsMaxmagNoNumber of the magazine- 1 numMagsMax UWordMulti-line: yes Magazine number numMagsMaxmagNrPlaces$TC_MAP7 * $TC_MAP6Number of real locations (in chain magazine) or number of slots (in box magazine)- UWordMulti-line: yes Magazine number numMagsMaxmagState $TC_MAP3 FBWState of the magazine1 = current magazine2 = disabled4 = magazine in loading position8 = motion is active16 = enabled for loading- 2 UWordMulti-line: yes Magazine number numMagsMaxmagWearCompoundNo $TC_MAP9Each magazine has its own active wear group (wear group number).The number of this group is stored in OPI variables magWearCompoundNo:Meaning: Number of active wear group.=0: No wear group active.>0: Number of wear group in which tool search commences.(this is the number of the active wear group.)
Page 1:
Lists 11/2003 EditionSINUMERIK 840D
Page 4 and 5:
SINUMERIK® DocumentationPrinting h
Page 6 and 7:
Preface 11.03SINUMERIK 810Dpowerlin
Page 8 and 9:
Preface 11.03Important notes!Import
Page 10 and 11:
Contents 11.033 Variables..........
Page 12 and 13:
Contents 11.033.10 Servo ..........
Page 14 and 15:
Contents 11.03Notesxiv© Siemens AG
Page 16 and 17:
Overview of FunctionsSINUMERIK CNC
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Overview of FunctionsPositioning Mo
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
1 Overview of Functions 11.031.2 Po
Page 64 and 65:
2 Machine and Setting Data 11.032.1
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
2 Machine- and Setting Data 11.032.
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
3 Variables 11.033.1 Introduction3.
Page 334 and 335:
3 Variables 11.033.1 Introduction3.
Page 336 and 337:
3 Variables 11.033.1 IntroductionNC
Page 338 and 339:
3 Variables 11.033.1 IntroductionNo
Page 340 and 341:
3 Variables 11.033.1 IntroductionMu
Page 342 and 343:
3 Variables 11.033.1 IntroductionVa
Page 344 and 345:
3 Variables 11.033.2 System dataext
Page 346 and 347:
3 Variables 11.033.2 System datamax
Page 348 and 349:
3 Variables 11.033.2 System datanum
Page 350 and 351:
3 Variables 11.033.2 System datanum
Page 352 and 353:
3 Variables 11.033.2 System data3.2
Page 354 and 355:
3 Variables 11.033.2 System datammc
Page 356 and 357:
3 Variables 11.033.2 System datapun
Page 358 and 359:
3 Variables 11.033.2 System dataMDD
Page 360 and 361:
Page 362 and 363:
3 Variables 11.033.2 System dataMDU
Page 364 and 365:
3 Variables 11.033.2 System data3.2
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
3 Variables 11.033.2 System dataMDU
Page 372 and 373:
3 Variables 11.033.3 State data of
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
3 Variables 11.033.5 Axis status da
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493: 3 Variables 11.033.5 Axis status da
Page 522 and 523: 3 Variables 11.033.6 Drive status d
Page 524 and 525: 3 Variables 11.033.6 Drive status d
Page 526 and 527: 3 Variables 11.033.7 Tool and magaz
Page 584 and 585: 3 Variables 11.033.8 Machine and se
Page 590 and 591: 3 Variables 11.033.9 Parameters3.9
Page 592 and 593:
3 Variables 11.033.10 Servo3.10 Ser
Page 594 and 595:
3 Variables 11.033.11 Diagnostic da
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
3 Variables 11.033.12 MMC statusNot
Page 616 and 617:
4 Interface Signals 11.034.1 Data m
Page 618 and 619:
4 Interface Signals 11.034.2 Signal
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646 and 647:
Page 648 and 649:
Page 650 and 651:
Page 652 and 653:
Page 654 and 655:
Page 656 and 657:
Page 658 and 659:
Page 660 and 661:
Page 662 and 663:
Page 664 and 665:
Page 666 and 667:
Page 668 and 669:
Page 670 and 671:
Page 672 and 673:
Page 674 and 675:
Page 676 and 677:
Page 678 and 679:
Page 680 and 681:
Page 682 and 683:
Page 684 and 685:
5 PLC-Blocks 11.035.1 Overview of o
Page 686 and 687:
5 PLC-Blocks 11.035.2 Overview of f
Page 688 and 689:
5 PLC-Blocks 11.035.4 Assigned time
Page 690 and 691:
A Appendix 11.03User Documentation/
Page 692 and 693:
A Appendix 11.03Manufacturer/Servic
Page 694 and 695:
A Appendix 11.03/FB3/SINUMERIK 840D
Page 696 and 697:
A Appendix 11.03/FBR//FBSI//FBSP/FB
Page 698 and 699:
A Appendix 11.03/PJU//PMS//POS1//PO
Page 700 and 701:
A Appendix 11.03Notes© Siemens AG,
Page 702 and 703:
I Index 11.03aaLeadV ..............
Page 704 and 705:
I Index 11.03Active G-function for
Page 706 and 707:
I Index 11.03AUXFU_ASSIGN_GROUPMD 2
Page 708 and 709:
I Index 11.03CC_VDI_IN_DATAMD 10400
Page 710 and 711:
I Index 11.03CMM_TOOL_LIFE_CONTROLM
Page 712 and 713:
I Index 11.03CTM_POS_COORDINATE_SYS
Page 714 and 715:
I Index 11.03Data version..........
Page 716 and 717:
I Index 11.03DRAM_FILESYSTEM_MASKMD
Page 718 and 719:
I Index 11.03ENC_TYPEMD 30240......
Page 720 and 721:
I Index 11.03FIXED_STOP_TORQUE_RAMP
Page 722 and 723:
I Index 11.03HMI_WIZARD_OPTIONMD 99
Page 724 and 725:
I Index 11.03JOG_VELO_RAPID_GEOMD 2
Page 726 and 727:
I Index 11.03Magazine .............
Page 728 and 729:
I Index 11.03MD 13200..............
Page 730 and 731:
I Index 11.03MM_NUM_SUBDIR_PER_DIRM
Page 732 and 733:
I Index 11.03MS_ASSIGN_MASTER_SPEED
Page 734 and 735:
I Index 11.03Number of Siemens appl
Page 736 and 737:
I Index 11.03OVR_RAPID_IS_GRAY_CODE
Page 738 and 739:
I Index 11.03POWER_LIMIT_GENERATORM
Page 740 and 741:
I Index 11.03Received message frame
Page 742 and 743:
I Index 11.03SAFE_MODE_SWITCH_TIMEM
Page 744 and 745:
I Index 11.03SERVO_DISABLE_DELAY_TI
Page 746 and 747:
I Index 11.03SPEEDCTRL_PT1_TIMEMD 5
Page 748 and 749:
I Index 11.03STOP_LIMIT_FINEMD 3601
Page 750 and 751:
I Index 11.03TM_LOAD_LOC2MD 9435 ..
Page 752 and 753:
I Index 11.03TRACE_VDI_AXMD 31600..
Page 754 and 755:
I Index 11.03UF_MODE_RAMP_TIME_2_M2
Page 756 and 757:
I Index 11.03V24_USER_DATABITSMD 93
Page 758 and 759:
11.03 I IndexNotes© Siemens AG, 20
Page 761 and 762:
Overview of SINUMERIK 840D/840Di/81
show all

Lists 11/2003 Edition

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?