Lists 11/2003 Edition

More documents

Recommendations

Info

3 Variables 11.033.2 System dataMDU_PA_ORI $SC_PA_ORI[x] x = Number protection zone A3Code for plane assignment of protection zone0 = G171 = G182 = G19- UWordMulti-line: yes Number of protection zone numProtAreaMDU_PA_TW $SC_PA_T_W[x] x = Number protection zone A3Code for workpiece or tool-oriented protection zone0 = workpiece-related1 = reserved2 = reserved3 = tool-related- UWordMulti-line: yes Number of protection zone numProtArea© Siemens AG, 2003. All rights reserved3-370 SINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition
11.03 3 Variables3.2 System data3.2.5 Area N, Mod. YNCFL: NCK instruction groupsOEM-MMC: Linkitem/Nck/FunctionGrouping/...All G functions currently configured for the channels are made available forreading by the NCK. They are configured via machine data. Since the Gfunctions are organized in groups, only one of which can be active at a time,this module is organized as a table.There are two columns for each G group. The 1st column lists the number of Gfunctions in a group (/N/YNCFL/Gruppe_NUM), this corresponds to the numberof rows in each subsequent column. This second column contains all the Gfunctions belonging to a group (/N/YNCFL/Gruppe).As a result, the data for a certain G group are calculated via a column offset.The column offset of each variable is:2 * (G group number - 1)The number of G groups is given in the variable "numGCodeGroups" in area N/ module Y. The resultant the maximum column offset of the variables is thus2 * numGCodeGroups.The G functions currently active are listed in area C / module SNCF.FunctionInstruction groupAttention: This variable is called "Gruppe" in the non-Windows MMC and the PLC !- String[16]Multi-line: yes Serial number /N/YNCFL/GroupIDGroupIDNumber of G functions in each G groupAttention: This variable is called "Gruppe_NUM" in the non-Windows MMC and the PLC !- UWordMulti-line: yes 1 1GruppeInstruction groupAttention: This variable is called "Function" in the MMC102 !- String[16]Multi-line: yes Serial number /N/YNCFL/Gruppe_NUMGruppe_NUMNumber of G functions in each G groupAttention: This variable is called "GroupID" in the MMC102 !- UWordMulti-line: yes 1 1© Siemens AG, 2003. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition 3-371
Page 1:
Lists 11/2003 EditionSINUMERIK 840D
Page 4 and 5:
SINUMERIK® DocumentationPrinting h
Page 6 and 7:
Preface 11.03SINUMERIK 810Dpowerlin
Page 8 and 9:
Preface 11.03Important notes!Import
Page 10 and 11:
Contents 11.033 Variables..........
Page 12 and 13:
Contents 11.033.10 Servo ..........
Page 14 and 15:
Contents 11.03Notesxiv© Siemens AG
Page 16 and 17:
Overview of FunctionsSINUMERIK CNC
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Overview of FunctionsPositioning Mo
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
1 Overview of Functions 11.031.2 Po
Page 64 and 65:
2 Machine and Setting Data 11.032.1
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
2 Machine- and Setting Data 11.032.
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321: 2 Machine and Setting Data 11.032.8
Page 332 and 333: 3 Variables 11.033.1 Introduction3.
Page 334 and 335: 3 Variables 11.033.1 Introduction3.
Page 336 and 337: 3 Variables 11.033.1 IntroductionNC
Page 338 and 339: 3 Variables 11.033.1 IntroductionNo
Page 340 and 341: 3 Variables 11.033.1 IntroductionMu
Page 342 and 343: 3 Variables 11.033.1 IntroductionVa
Page 344 and 345: 3 Variables 11.033.2 System dataext
Page 346 and 347: 3 Variables 11.033.2 System datamax
Page 348 and 349: 3 Variables 11.033.2 System datanum
Page 350 and 351: 3 Variables 11.033.2 System datanum
Page 352 and 353: 3 Variables 11.033.2 System data3.2
Page 354 and 355: 3 Variables 11.033.2 System datammc
Page 356 and 357: 3 Variables 11.033.2 System datapun
Page 358 and 359: 3 Variables 11.033.2 System dataMDD
Page 362 and 363: 3 Variables 11.033.2 System dataMDU
Page 364 and 365: 3 Variables 11.033.2 System data3.2
Page 372 and 373: 3 Variables 11.033.3 State data of
Page 420 and 421:
3 Variables 11.033.3 State data of
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
3 Variables 11.033.5 Axis status da
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
3 Variables 11.033.6 Drive status d
Page 524 and 525:
3 Variables 11.033.6 Drive status d
Page 526 and 527:
3 Variables 11.033.7 Tool and magaz
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
3 Variables 11.033.8 Machine and se
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
3 Variables 11.033.9 Parameters3.9
Page 592 and 593:
3 Variables 11.033.10 Servo3.10 Ser
Page 594 and 595:
3 Variables 11.033.11 Diagnostic da
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
3 Variables 11.033.12 MMC statusNot
Page 616 and 617:
4 Interface Signals 11.034.1 Data m
Page 618 and 619:
4 Interface Signals 11.034.2 Signal
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646 and 647:
Page 648 and 649:
Page 650 and 651:
Page 652 and 653:
Page 654 and 655:
Page 656 and 657:
Page 658 and 659:
Page 660 and 661:
Page 662 and 663:
Page 664 and 665:
Page 666 and 667:
Page 668 and 669:
Page 670 and 671:
Page 672 and 673:
Page 674 and 675:
Page 676 and 677:
Page 678 and 679:
Page 680 and 681:
Page 682 and 683:
Page 684 and 685:
5 PLC-Blocks 11.035.1 Overview of o
Page 686 and 687:
5 PLC-Blocks 11.035.2 Overview of f
Page 688 and 689:
5 PLC-Blocks 11.035.4 Assigned time
Page 690 and 691:
A Appendix 11.03User Documentation/
Page 692 and 693:
A Appendix 11.03Manufacturer/Servic
Page 694 and 695:
A Appendix 11.03/FB3/SINUMERIK 840D
Page 696 and 697:
A Appendix 11.03/FBR//FBSI//FBSP/FB
Page 698 and 699:
A Appendix 11.03/PJU//PMS//POS1//PO
Page 700 and 701:
A Appendix 11.03Notes© Siemens AG,
Page 702 and 703:
I Index 11.03aaLeadV ..............
Page 704 and 705:
I Index 11.03Active G-function for
Page 706 and 707:
I Index 11.03AUXFU_ASSIGN_GROUPMD 2
Page 708 and 709:
I Index 11.03CC_VDI_IN_DATAMD 10400
Page 710 and 711:
I Index 11.03CMM_TOOL_LIFE_CONTROLM
Page 712 and 713:
I Index 11.03CTM_POS_COORDINATE_SYS
Page 714 and 715:
I Index 11.03Data version..........
Page 716 and 717:
I Index 11.03DRAM_FILESYSTEM_MASKMD
Page 718 and 719:
I Index 11.03ENC_TYPEMD 30240......
Page 720 and 721:
I Index 11.03FIXED_STOP_TORQUE_RAMP
Page 722 and 723:
I Index 11.03HMI_WIZARD_OPTIONMD 99
Page 724 and 725:
I Index 11.03JOG_VELO_RAPID_GEOMD 2
Page 726 and 727:
I Index 11.03Magazine .............
Page 728 and 729:
I Index 11.03MD 13200..............
Page 730 and 731:
I Index 11.03MM_NUM_SUBDIR_PER_DIRM
Page 732 and 733:
I Index 11.03MS_ASSIGN_MASTER_SPEED
Page 734 and 735:
I Index 11.03Number of Siemens appl
Page 736 and 737:
I Index 11.03OVR_RAPID_IS_GRAY_CODE
Page 738 and 739:
I Index 11.03POWER_LIMIT_GENERATORM
Page 740 and 741:
I Index 11.03Received message frame
Page 742 and 743:
I Index 11.03SAFE_MODE_SWITCH_TIMEM
Page 744 and 745:
I Index 11.03SERVO_DISABLE_DELAY_TI
Page 746 and 747:
I Index 11.03SPEEDCTRL_PT1_TIMEMD 5
Page 748 and 749:
I Index 11.03STOP_LIMIT_FINEMD 3601
Page 750 and 751:
I Index 11.03TM_LOAD_LOC2MD 9435 ..
Page 752 and 753:
I Index 11.03TRACE_VDI_AXMD 31600..
Page 754 and 755:
I Index 11.03UF_MODE_RAMP_TIME_2_M2
Page 756 and 757:
I Index 11.03V24_USER_DATABITSMD 93
Page 758 and 759:
11.03 I IndexNotes© Siemens AG, 20
Page 761 and 762:
Overview of SINUMERIK 840D/840Di/81
show all

Lists 11/2003 Edition

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?