Lists 11/2003 Edition

Overview of FunctionsSINUMERIK CNC Controlsn Basic versionv Optionx Function dependent on operating softwarec Precondition: HMI Advanced operating software– Not possibleEmpty field: Function not dependent on operating softwareOrder No.SINUMERIK 802802S 802C 802DPCU210■ Compatible measuring systems (continued)Absolute encoder connection with SSI interface – – – nnAbsolute encoder connection with EnDat linear/rotaryn• onboard – – – n• via SIMODRIVE 611 digital closed-loop control module – – – n• via SIMODRIVE 611 universal closed-loop control module – – n nnAbsolute/incremental encoder integrated in 1FT6/1FKn• onboard – – – n• via SIMODRIVE 611 digital closed-loop control module – – – n• via SIMODRIVE 611 universal closed-loop control module – n n nnIncremental encoder with sin/cos 1 V ppn• onboard – – – n• via SIMODRIVE 611 digital closed-loop control module – – – n• via SIMODRIVE 611 universal closed-loop control module – n n nnResolver integrated in 1FT6/1FKvia SIMODRIVE 611 universal closed-loop control module– n – nn■ CNC functionality: Program functionsPreprocessing memory, dynamic (FIFO) n n n nLook Ahead n n n n5) 5) 5) nProgram preprocessing 6FC5 251 - 0AC02 - 0AA0 – – – nAxis/spindle replacement – – – nGeometry axes (can be switched over online in CNC program) – – – nFrame concept – – n nInclined machining with frames – – – n■ CNC functionality: Axis functionsFeedrate override from 0 % to 200 % 120 120 n nFeedrate override, axis-specific from 0 % to 200 % – – n nTraversing range ± 9 decades n n n nRotary axis, endlessly turning – – n nMeasuring systems 1 and 2, selectable – – – nVelocity, maximum 300 m/s 12 n n nAcceleration with jerk limitation – – n nProgrammable acceleration n n n nn1) Second measuring system for one axis via 2nd axisSIMODRIVE 611 universal.2) For analog axes with ADI 4.3) For positioning tasks.4) Suitable SSI encoders on request.5) With limited functionality, see Part 13 "Glossary".1/20 Siemens NC 60 · 2002 (04.02)