Lists 11/2003 Edition

11.03 3 Variables3.3 State data of systemprotocTrigNumEvDelayLogging: Number of events to be recorded after the trigger eventhas occurred before the logging operation is stopped.- 0 0 UWordMulti-line: yes User No. (1-10) 10protocTrigRemMatchCountLogging: Indicates how often the comparison must be correct until trigger fires.- 0 0 UWordMulti-line: yes User No. (1-10) 10protocTrigStateLogging: Triggering status0: Passive (trigger not active)1: Active (trigger is active, but has not yet responded)2: Delay (trigger has responded and is waiting for delay)3: firing (trigger has responded, but still has to respond several times, until trigger is performed)4: done (trigger has responded and is not active)- 0 0 UWordMulti-line: yes User No. (1-10) 10protocTrigTypeLogging: Triggering method0: Monitor for equals1: Monitor for greater than/equal to2: Monitor for greater than3: Monitor for less than/equal to4: Monitor for less than5: Monitoring for disparity6: Monitoring for change in value7: Monitoring for increasing values8: Monitoring for decreasing values- 0 0 UWordMulti-line: yes User No. (1-10) 10protocTrigValueInt16Logging: Integer 16-bit value with which trigger variable must becompared- 0 0 UWordMulti-line: yes User No. (1-10) 10protocTrigValueInt32Logging: Integer 32-bit value with which trigger variable must becompared- 0 0 UDoublewordMulti-line: yes User No. (1-10) 10protocTrigValueReal32Logging: Real 32-bit value with which trigger variable must becompared- 0 0 FloatMulti-line: yes User No. (1-10) 10protocTrigValueReal64Logging: Real 64-bit value with which trigger variable must becompared- 0 0 DoubleMulti-line: yes User No. (1-10) 10© Siemens AG, 2003. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition 3-381