12.07.2015 Views

Lists 11/2003 Edition

Lists 11/2003 Edition

Lists 11/2003 Edition

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

4 Interface Signals <strong>11</strong>.034.2 Signals of the PLC application interfaceDB31-61Continuation:Signals to axis/spindle (PLC NCK)Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0DBB 84SpindleActive spindle operating mode /S1/Tappingwithoutcompensatingchuck /S1/CLGONactive/S8/(SW 2 andhigher)SUG active(grindingwheelsurfacespeed)Const.cuttingspeedactiveControlmodeOscillationmodePositioningmodeSynchronousmodeDBB 85SpindleDBB 86SpindleM function (binary) for spindle /S1/DBD 88SpindleS function (floating-point) for spindle/S1/DBB 926<strong>11</strong>D1)DBB 936<strong>11</strong>DEnablepulses/A2/n controllerintegratordisabled/A2/Driveready/A2/RLIactiveActivemotor /A2/Speedsetpointsmoothingactive /A2/Torquelimit 2active /A2/HLGSSactive/A2/Set-upmodeactive /A2/Active drive parameter set /A2/1) B A C B ADBB 946<strong>11</strong>DVariablesignalingfct. /A2/n act = n set/A2/|n act | < n x/A2/|n act |

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!