Lists 11/2003 Edition

11.03 3 Variables3.7 Tool and magazine data3.7.29 Area T, Mod. TAP: Application-specific magazine location dataOEM-MMC: Linkitem/Tool//...Data module TAP is organized as a 2-dimensional variable array. This modulecontains application-specific data of a T area. Every element can be addressedvia a column and row index:The column index is the magazine number, i.e. one column contains theapplication-specific magazine location data for all the locations of onemagazine. The assignments between magazines and magazine numbers arelisted in the appropriate Magazine Directory (TMV) module in the relevant Tarea. A request is negatively acknowledged if a non-existent magazine numberis entered as the column index.The number of rows is determined by the number of parameters per magazinelocation and the number of magazine locations:Max. number of rows = numMagLocParams_tap * magNrPlacesApplication-specific magazine location data are all of the same data type.Application-specific magazine location data are reserved for SIEMENSapplications.siemPlaceData$TC_MPPCSx[y,z]Siemens application magazine location data.These parameters can be used only if machine data$MN_MM_NUM_CCS_MAGLOC_PARAM and $MN_MM_TOOL_MANAGEMENT_MASK are setaccordingly.Reserved for SIEMENS applications.- 0 UWordMulti-line: yes ParameterNumber +numMagLocParams_tap *MagazineLocationNumber-1numMagLocParams_tap * magNrPlaces© Siemens AG, 2003. All rights reservedSINUMERIK 840D/840Di/810D SIMODRIVE 611 digital Lists (LIS) – 11.03 Edition 3-581