Barrel Heaters - Hasmak.com.tr

Hot RunnerNozzle <strong>Heaters</strong>Metric FIRERODCartridgeTermination OptionsSwaged-in Flexible LeadsMinimum No-Heat25 mm (1 in.)Swaged-in flexible leads, with asilicone-fiberglass insulation, arere<strong>com</strong>mended for applications inwhich the leads must be bent at theexit point from the heater. Unlesslonger length is specified, 250 mm(10 in.) leads are supplied.<strong>Heaters</strong> 150 mm (6 in.) or shortergenerally have a 6 mm (0.25 in.)no-heat section. <strong>Heaters</strong> to 250 mm(10 in.) require a 25 mm (1 in.)no-heat section. <strong>Heaters</strong> greaterthan 250 mm (10 in.) may requiremore than a 25 mm (1 in.) no-heatsection. To order, please specifyswaged-in flexible leads.Right Angle LeadsMinimum No-HeatRight angle leads are used inapplications with a high degree offlexing and when space limitationsare critical. Lead wires exit at aMetric FIREROD MinimumDiameter No-Heat Lengthmm mm (in.)6.5 11 ( 7 ⁄16)8 11 ( 7 ⁄16)10 13 ( 1 ⁄2)12.5 16 ( 5 ⁄8)16 19 ( 3 ⁄4)20 22 ( 7 ⁄8)90 degree angle through the side ofthe heater sheath. To order, specifyright angle leads and lead length.Stainless Steel BraidMinimum No-Heatleads exit at a right angle, a crimpconnector is used to attach thebraids.Unless otherwise specified, leadsare 350 mm (14 in.) and the braid is300 mm (12 in.) long.To order, specify either straight orright angle stainless steel braid,lead length and no-heat section.Stainless steel braid is designed toprotect leads from abrasion againstsharp edges. It is the most flexibleof Watlow’s protective leadarrangements.When the leads exit straight out, thebraid is swaged into the no-heatsection of the heater. When theMetric Min. No-Heat LengthFIREROD Dia. Straight Right Anglemm mm (in.) mm (in.)6.5 29 (1 1 ⁄8) 14 ( 1 ⁄2)8 29 (1 1 ⁄8) 14 1⁄2)10 38 (1 1 ⁄2) 16 ( 5 ⁄8)12.5 38 (1 1 ⁄2) 17 ( 2 ⁄3)16 38 (1 1 ⁄2) 22 ( 7 ⁄8)20 38 (1 1 ⁄2) 30 (1 3 ⁄16)106