Barrel Heaters - Hasmak.com.tr

W A T L O WTemperatureControllers4-, 8-, 16-LoopCLS200The Watlow CLS200 is a powerful lineof controllers, <strong>com</strong>biningperformance and flexibility with<strong>com</strong>pact design. The four, eight and16-loop versions provide <strong>com</strong>pletecontrol solutions for a broad range ofapplications. Support for multipletypes of sensor inputs is available,including thermocouples, RTDs,linear voltage, current and frequency.Each controller can operate as astand-alone system, and includesbuilt-in serial <strong>com</strong>munications for<strong>com</strong>puter interface and dataacquisition. An enhanced featuresoption offers cascade control, ratiocontrol, differential control, processvariable retransmit and remoteanalog set point.The CLS200 controllers are UL ® andC-UL ® listed, meet the requirementsof the European Community EMCDirective and carry the CE mark.Features and BenefitsPID control of up to 16 heat andcool loops• Minimal panel space per loop• Reduced installation time• More reliable: fewer parts meansfewer failuresAuto-tune• Less time tuning• Achieve excellent control with lessexpertiseMenu-guided operation with fulltext display• Quick controller setup• Easy to operateEight jobs stored and recalled• Quickly change from one processto anotherMultiple and mixed inputs• Simply change sensor types atthe last minute• Less to learn, less inventorySensor failure detection• Reduces time troubleshootingreversed, shorted and opensensorsHigh/low process and deviationalarms for each input• Configure alarms as needed tointegrate with PLC or other controlelements34 digital outputs• Flexible configuration: use outputsas needed for control, alarms andprocess variable retransmitEIA/TIA-232 and 485<strong>com</strong>munications• Use software to configure andoperate• Integrate with other controllersand softwareFirmware OptionsChoose firmware with the featuresneeded for the application:• Standard—includes closed-loopPID control, auto-tune, alarms,job memory and failed sensordetection• Extruder— includes the standardfirmware features, with PID controlspecifically adapted for plasticextruders• Enhanced Features— includesthe standard firmware featureswith the addition of processvariable retransmit, remote analogset point, cascade control, ratiocontrol and differential controlalgorithms. Each channel can beconfigured for standard PIDcontrol or one of the othercontrol algorithms. Each channelof cascade control or remoteanalog set point requires twocontroller channels. Unusedcontrol outputs on any channelcan be configured for retransmit.Because the CLS200 has no onboardanalog outputs, applications thatuse process variable retransmittypically require one SDAC moduleper retransmitted signal.Watlow’s WATVIEWsoftware is ideal to usewith the CLS200. Seepage 180 for moreinformation andordering details.UL ® and C-UL ® are registered trademarks ofUnderwriter’s Laboratories, Inc.245ExtrusionTemperature Controllers