Barrel Heaters - Hasmak.com.tr

Hot RunnerNozzle <strong>Heaters</strong>FIREROD CartridgeMade-to-OrderStraight OptionsBSwaged-in Flexible LeadsSwaged-in flexible leads are used inapplications where a high degree offlexing exists or the leads must bebent sharply adjacent to the heaterwithout exposing or breaking theconductor. The stranded wire leadsare connected internally and exitthrough the lead end.Minimum lead end no-heat requiredis 25 mm (1 in.). For heaters over250 mm (10 in.) the minimum no-heatis 12 percent of overall length plus6 mm (0.25 in.).To order, please contact the factory.Minimum No-HeatMinimum No-HeatMade-to-Order StraightStainless Steel HoseStraight stainless steel hoseprovides the best protection againstabrasion from sharp edges. It alsooffers ease of handling and wiring inabrasive environments.Unless specified, a 305 mm (12 in.)hose is supplied. Leads are 51 mm(2 in.) longer than hose.Minimum lead end no-heat requiredis 38 mm (1.5 in.). For heaters over250 mm (10 in.) the minimum no-heatis 12 percent of overall length plus6 mm (0.25 in.).To order, specify straight hoseunits 250 mm (10 in.) and under.Minimum No-HeatMade-to-Order StraightStainless Steel BraidStainless steel braid is designedto protect leads from abrasionagainst sharp edges. It is the mostflexible of Watlow’s protective leadarrangements.Unless specified, a 305 mm (12 in.)braid is supplied. Leads are 51 mm(2 in.) longer than braid.Minimum lead end no-heat requiredis 38 mm (1.5 in.). For heaters over250 mm (10 in.) the minimum no-heatis 12 percent of overall length plus6 mm (0.25 in.).To order, specify straight stainlesssteel braid.Minimum No-HeatMinimum No-HeatMade-to-Order StraightStainless Steel Hose with Teflon ®Leads and SealStraight stainless steel hose withTeflon ® leads and seal for FIRERODsgreater than 250 mm (10 in.) longwith straight hose will have aMade-to-Order StraightStainless Steel Braid withTeflon ® Leads and SealStraight stainless steel braid withTeflon ® leads and seal for FIRERODsgreater than 250 mm (10 in.) longwith straight braid will have aminimum lead end no-heat requiredis 35 mm (1.5 in.).To order, specify straight stainlesssteel hose.minimum lead end no-heat requiredis 35 mm (1.5 in.).To order, specify straight stainlesssteel braid with Teflon ® leads andseal.84