Barrel Heaters - Hasmak.com.tr

W A T L O W<strong>Heaters</strong>Radiant Band andStrip EmittersConstructed using Watlow'sexclusive mineral insulation, ruggedstainless steel sheath and highemissivity coating, these heaters canoperate at temperatures to (700°C)1300°F and 4.7 W/cm 2 (30 W/in 2 ).SizesStrip EmittersWidth: 76.2 mm (3 in.)Length: 152.4 mm (6 in. min.)787.4 mm (31 in. max.)Band EmittersWidth: 25.4 mm (1 in.)50.8 mm (2 in.)76.2 mm (3 in.) max.• Segment Length: 152.4 mm (6 in.)min. to 1066.8 mm (42 in.) max.• Partial arcs to full 360° coverage:Consult Watlow.• High emissivity coating on insidestandard. For high emissivitycoating on outside: ConsultWatlow.• Post terminals standard; hightemperature Type H leadsavailable.Options• Mounting studs• Mounting clips for 76.2 mm (3 in.)wide emitter strips, part #MM6063• Thermocouple welded to sheath• Thermocouple pocket welded tosheath• Bayonet fitting for VAT stylethermocoupleApplications• Precise toning in thermoforming• Heating rotating drums and rollers• Small spot heating• Heat shrinking and curing wirecoatings14.3 mm(0.5625 in.)3.97 mm(0.1562 in.)1 /4"How to OrderThe radiant band/strip emitters areavailable made-to-order only. It ishelpful to have the followinginformation available:• Heated width and length (ordiameter for band emitters)• Total wattage• Voltage, single-phase only• Mounting studs, if desired• Thermocouple or thermowell orthermocouple pocket, if desired19.05 mm(0.75 in.)Overall = Heated + 30 mm (1.1875 in.)LOptionalType KT/CAvailabilityMade-to-order: Consult WatlowThermoforming<strong>Heaters</strong>325