Barrel Heaters - Hasmak.com.tr

<strong>Heaters</strong>QuartzApplications andTechnical Data12.7 mm(0.5 in.)Length To The Ends Of Ceramics12.7 mm(0.5 in.)12.7 mm(0.5 in.)Cold25 mm(1 in.)Heated LengthCold25 mm(1 in.)14 mm(0.5625 in.)SpecificationsOutside diameter (nominal/actual):10 mm (0.6 in./0.394 in.)13 mm (0.5 in./0.512 in.)16 mm (0.625 in./0.630 in.)Ceramic end caps:16 X 13 mm tube: 0.375 in.(0.6875 in. dia. x 0.5 in. long)19 X 13 mm tube: 0.5 in.(0.75 in. dia. x 0.5 in. long)22 X 13 mm tube: 0.625 in.(0.9375 in. dia. X 0.5 in. long)254-610 x 12.7 mm(10-24 X 0.5 in.) Std.Available lengths: 200 mmto 1829 mm (8 in. to 72 in.)0.375 in. diameter, 60 in.maximum lengthLength tolerances:Sheath: ±3.2 mm (0.125 in.)Heated length: ±6.3 mm(0.25 in.)No-Heat length: 25 mm (1 in.)standardScrew terminal: 10-24 threadTermination: Type T1, T2, T3, T4,T5, T6ElectricalResistance tolerance:NEMA standard +10 percent,-5 percentWattage tolerance:NEMA standard +5 percent,-10 percentMaximum volts: Consult factoryMaximum amperage: 20AMaximum watt density:Consult factoryStandard TerminationsType T1Type T2Type T319 mm Ref.(0.75 in.)10 mm(0.375 in.)Standard termination: 10-24stainless steel screw threadterminals.Type T4Quick disconnect fuse style:9.5 mm X 12.7 mm long(0.4375 in. dia. X 0.5 in.)terminals.Type T514.2 mm(0.5625 in.)22 mm Ref.(0.875 in.)Tabs with slotted holes:SS Tabs 12.7 mm wide X 19 mm long(0.5 in. X 0.25 in.). Slots 7.1 mm X 9.5mm (0.2812 in. X 0.375 in.).Type T6Flexible lead termination: 305 mm (12 in.)flexible leads; if longer leads are required,please specify.Flexible lead termination: 10-24 SSscrew thread terminals insulated withceramic terminal covers. Terminalsare pre-wired with 305 mm (12 in.)flexible lead wire. If longer leads arerequired, please specify.305 mm (12 in.) flexible leads exitthe ceramic cap. There are no postterminals. Please specify if longerleads are required.296Mounting Frames for WatlowQuartz <strong>Heaters</strong>See Raymax 1626 on page 303.