Barrel Heaters - Hasmak.com.tr

TemperatureControllers4-, 8-, 16-LoopCLS200SpecificationsOperator Interface• 32-character vacuum fluorescentdisplay• Eight-key keypad to accessguided menus and prompts,enter passkey sequence, setvalues, switch betweensingle channel and multiplechannel displays• Controller configuration can beloaded through the standardserial portAnalog Inputs• CLS204 4 Differential• CLS208 8 Differential• CLS216 16 Single-endedNoise Rejection• 120db at 60HzTemperature Coefficient• 40 ppm/˚CSensors/Inputs• Thermocouples: User-selectabletype, direct connection,linearization, reference junction<strong>com</strong>pensation, reversed andshorted T/C detection andupscale break protection withoutput averaging• RTD: (CLS204 and CLS208 only)2- or 3-wire, platinum, 100Ω @ 0˚C,DIN 0.003850Ω/˚C curve. Twouser-selectable ranges offerdifferent resolutions. Requiresscaling resistors. See Special/Linear Inputs in OrderingInformation• Linear: current and voltagesignals from linear transmitters• Pulse input246Input Range and AccuracyType B 66 - 1760°C ±4.0°C(150 - 3200°F) (±7.2°F)Type E -200 - 787°C ±1.0°C(-328 - 1448°F) (±1.8°F)Type J -212 - 760°C ±1.2°C(-350 - 1400°F) (±2.2°F)Type K -268 - 1371°C ±1.3°C(-450 - 2500°F) (±2.3°F)Type R -18 - 1766°C ±2.8°C(0 - 3210°F) (±5.0°F)Type S -18 - 1760°C ±2.8°C(0 - 3200°F) (±5.0°F)Type T -268 - 399°C ±1.6°C(-450 - 750°F) (±2.9°F)RTD’s available on CLS204 andCLS208 onlyRange Accuracy(RTD1) -100 - 275°C 1.1°C(-148 - 527°F) (2.0°F)(RTD2) -120 - 840°C 1.6°C(-184 -1544°F) (2.9°F)Note: Accuracy @ 25˚C (77°F)ambient. Valid for 10 to 100 percentof span except Type B, which isspecified for 430°C to 1760°C(800˚F to 3200˚F.) RTD is for 100percent of spanLinear Voltage and Current InputsRequires scaling resistors.See Special Inputs in OrderingInformation0-10mAÎ(dc)0-20mAÎ(dc)/4-20mAÎ(dc)0-100mVÎ(dc)0-500mVÎ(dc)0-1VÎ(dc)0-5VÎ(dc)0-10VÎ(dc)0-12VÎ(dc)Other ranges available. ConsultfactoryPulse Input• One TTL-level square wave inputup to 2kHzInput Sampling Rate @ 60HzEach channel has the followingscans per second:• CLS204: 6 samples per second,(update time: 0.167 sec.)• CLS208: 3 samples per second,(update time: 0.333 sec.)• CLS216: 1.5 samples per second,(update time: 0.667 sec.)Internal Measurement Resolution• 0.006 percent, greater than 14 bitsCalibration• Automatic zero and full scaleDigital Inputs• TTL-level used for selectingrecipes or jobs or R/S triggers• Eight inputs and one pulse inputwith 50-pin terminal board option• Two inputs and pulse input orthree inputs with 18-pin terminalblock optionDigital Outputs• 34 digital outputs are availablewith 50-pin terminal board option• 10 control outputs with 18-pinterminal block option• One or two control outputs areuser assigned for each loop• Each control output can beconfigured for on-off timeproportioning, or distributed zerocrossing• Outputs sink up to 60mA each at5VÎ(dc)• 350mA at 5VÎ(dc) available fromon-board supplyAnalog Outputs• Use DAC and SDAC accessorymodules. For process variableretransmit, use SDAC only. Seepage 179.