Barrel Heaters - Hasmak.com.tr

W A T L O WDie andFormer <strong>Heaters</strong>THINBAND MicaBandPhysical Limitations ofLead VariationsCheck the table to be certain thevariations and lead arrangementsyou order are available on theheater size you require. If you needto exceed any limitations pleasecontact a Watlow representative.32 mm(1.25 in.)Minimum63 mm (2.5 in.)Maximum368 mm (14.5 in.) 1pc.736 mm (29 in.) 2pc.THINBAND10-24thread2.8 mm(0.110 in.)Physical Limitations of Lead VariationsDiameterWidthHeater Type Min. Max. Min. Max.mm (in.) mm (in.) mm (in.) mm (in.)1 pc. const. 25.4 (1) 368.3 (14 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)2 pc. const. 127 (5) 736.6 (29) 38.1 (1 1 ⁄2) 177.8 (7)NozzleType A 25.4 (1) 101.6 (4) 25.4 (1) 152.4 (6)Type L 25.4 (1) 101.6 (4) 25.4 (1) 152.4 (6)<strong>Barrel</strong>Type T 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Type H 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Type F, FR 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Type E 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Type C, BR 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Type K, KR 63.5 (2 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Terminal Box 88.9 (3 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)European Plug1 pc. vertical 63.5 (2 1 ⁄2) 368.3 (14 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)1 pc. horizontal 63.5 (2 1 ⁄2) 368.3 (14 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Welded <strong>Barrel</strong> Nuts1 pc. 63.5 (2 1 ⁄2) 368.3 (14 1 ⁄2) 38.1 (1 1 ⁄2) 177.8 (7)Note: Some <strong>com</strong>binations of maximums and minimums cannot occur on thesame heater. Check the table to be certain the variations and lead arrangementsyou order are available on the heater size you require. If you need to exceed anylimitations, please contact your Watlow representative.Standard gap is 9.53 mm (0.375 in.) between clamp bars.ExtrusionDie and Former <strong>Heaters</strong>14 mm(0.5625 in.)Minimum 38 mm (1.5 in.)Maximum 177 mm (7 in.)235