Barrel Heaters - Hasmak.com.tr

Hot RunnerNozzle <strong>Heaters</strong>Metric EB CartridgeThe Watlow EB cartridge heater isa proven performer like the metricFIREROD ® . That’s because thesame quality materials go into itsconstruction; MgO insulation,nickel-chromium resistance wire,silicone-fiberglass insulated leadwires. The only difference is that theEB cartridge is packaged in a moreeconomical design. Instead ofhaving the high watt densitycapabilities of a metric FIREROD,it’s made for medium watt densityapplications.Performance Capabilities• Part temperatures to 600°C(1100°F)• Maximum watt density to30 W/cm 2 (190 W/in 2 )• Maximum voltage to 480VÅ(ac)Features and Benefits• Magnesium oxide insulation,<strong>com</strong>pacted to the proper density,results in high dielectric strengthand contributes to faster heat-up.• Nickel-chromium resistancewire, precisely wound throughthe heated length, assures even,efficient distribution of heat to thesheath.• Metallurgically-bondedconductor pins, crimpconnectedto the resistance wires,ensure trouble-free electricalcontinuity. This process provideslead flexibility just 8 mm (0.3125in.) from the end of the heater.• Flexible stranded wires, withsilicone-fiberglass sleeve, insulatethe wires to temperatures of250°C (480°F).• Optional lead end with siliconerubber seal protects the leadsagainst moisture and othercontaminants.FiberglassInsulatedCrimped onLeads• VDE <strong>com</strong>ponent recognition to230VÅ(ac) according to VDE0721 part 1/3.78 and part 2/3.78Section E in connection with VDE0720 part 1/11.74.HeatedLength• Next day shipment on all stock units.6 mm(0.25 in.)No-Heat6 mm(0.25 in.)No-HeatSolidConductorsNickel-ChromiumResistance WireMagnesiumOxideInsulationStainlessSteel SheathApplications• Plastic injection molds, dies andsealing jaws• Hot melt systems, labeling112