Barrel Heaters - Hasmak.com.tr

Hot RunnerNozzle <strong>Heaters</strong>FIREROD CartridgeLA StockTermination OptionsBMinimum No-HeatLA Swaged-in Flexible LeadsLA swaged-in flexible leads areused in applications where a highdegree of flexing exists or the leadsmust be bent sharply adjacent to theheater without exposing or breakingthe conductor. The stranded wireleads are connected internally andexit through the lead end. Theoverall length of the heater isextended by 6 mm (0.25 in.).To order, specify length addercode E bringing the total disk endno-heat to 14 mm (0.5625 in.)This LA option is not available on3 mm (0.125 in.) diameter. On 3 mm(0.125 in.) diameter FIRERODs,leads are connected externally usinga solid conductor lead wire.Ifstranded wire is desired on 3 mm(0.125 in.) diameter units, consultfactory.Right Angle (Swaged-in) LeadsSwaged-in LeadsNo-HeatLengthNo-HeatLengthNo-Heat ExtensionsNo-heat extensions are re<strong>com</strong>mendedin applications where leads maybe exposed to excessive heat, thusrequiring a cooler lead end. Alsoused when heat is not requiredalong the entire length of theFIREROD.No-heat extensions are available formost LA stock options in diametersof 9, 13, 16 and 19 mm (0.375, 0.5,0.625 and 0.5 in.). These extensionsare designed to provide a total noheatlength of 25, 38, 51 or 65 mm(1, 1.5, 2 or 2.5 in.) at the lead end ofstock FIRERODs only. Consultfactory for available LA options.Minimum No-Heat25.4 mm(1 in.)LA Teflon ® Seal and LeadsLA Teflon ® seal and leads protectthe heater against moisture/contamination from lubricating oil,cleaning solvents, plastic material orfumes and organic tapes. This sealis effective to 205°C (400°F) undercontinuous operation.Please note when ordering thisoption, that a minimum no-heatsection is required to allow forconstruction. Additional no-heat maybe required to keep the seal beloweffective temperatures. The minimumlead end no-heat is one inch. TheLA cap adds 19 mm (0.75 in.) to theoverall length of the heater. To order,specify option code T.Minimum No-Heat25.4 mm(1 in.)LA Silicone Rubber Sealand LeadsLA silicone rubber seal and leadsprotect the heater against moisture/contamination from lubricating oil,cleaning solvents, plastic material orfumes and organic tapes. This sealis effective to 230°C (450°F) undercontinuous operation.Please note when ordering thisoption, that a minimum no-heatsection is required to allow forconstruction. Additional no-heat maybe required to keep the seal beloweffective temperatures. The minimumlead end no-heat is one inch. The LAcap adds 19 mm (0.75 in.) to theoverall length. To order, specifyoption code P.78