Barrel Heaters - Hasmak.com.tr

Die andFormer <strong>Heaters</strong>MI Strip• Same day shipment on all stock units.The Watlow MI strip is a thin,responsive heater that setsunmatched standards forperformance and durability. It makesuse of the most advanced heaterconstruction techniques, includingembedding a nickel chromiumelement wire in Watlow’s exclusivemineral insulation. Only 1.067 mm(0.042 in.) thick, this layer ofinsulation brings the element wirecloser to the heater sheath. Theresult is heat flows easily from theelement wire to the sheath, thusallowing the wire to run cooler thanconventional heaters.Performance Capabilities• Sheath temperatures to 760°C(1400°F)• Watt densities to 15.5 W/cm 2(100 W/in 2 )• Maximum voltage 480VÅ(ac)Features and Benefits• Higher watt densities than anyother strip heater contribute tofaster heat-up.• Exclusive mineral insulation<strong>com</strong>bines high dielectric strengthand superior thermal conductivitywhich transfers heat rapidly to thesheath.• 304 stainless steel sheath iswelded together at strategicpoints to maintain the high<strong>com</strong>paction of mineral insulationand produce a rigid heater.• UL ® <strong>com</strong>ponent recognition isavailable in 250VÅ(ac) or less.Applications• Die and mold heating• High temperature resins• Platen heating9.1 mm (0.36 in.) DiameterMounting HolesMineral InsulationHow to OrderPlease specify:• Watlow code number• Overall dimensions: length andwidth• Wattage: see maximum allowablewatt density graph• Termination type(parallel or one-on-one)• Mounting holes, if desired• QuantityWelded 10-24 ThreadedPost Terminals304 Stainless Steel SheathNickel ChromiumElement WireIf stock units do not meet specificapplication needs, Watlow canmanufacture MI strip heaters to meetspecial requirements.AvailabilityStock: Same day shipmentMade-to-order: Consult a Watlowsales engineer or authorizeddistributor.222