Barrel Heaters - Hasmak.com.tr

W A T L O W<strong>Heaters</strong>RAYMAX 2030Nominal Nominal ApproxHeated Heated NetWidth Length Watt Density Wt. Codemm (in.) mm (in.) Volts Watts W/cm 2 (W/in 2 ) kg (lbs) Availability No.355 (14) 305 (12) 240 3500 3.2 (20.8) 3.8 (8.5) Stock VP514A12T460 (18) 240 4900 3.0 (19.4) 5.5 (12.2) Standard VP514A18T610 (24) 240 7000 3.2 (20.8) 7.3 (16.0) Standard VP514A24T760 (30) 240 8400 3.1 (20.0) 9.0 (19.8) Standard VP514A30T915 (36) 240/240 ➂ 9800 3.0 (19.4) 10.7 (23.6) Standard VP514A36T405 (16) 305 (12) 240 3600 2.9 (18.8) 4.3 (9.5) Standard VP516A12T460 (18) 240 5700 3.1 (19.8) 6.3 (13.9) Standard VP516A18T610 (24) 240 7100 2.9 (18.5) 8.2 (18.2) Standard VP516A24T760 (30) 240/240 ➂ 9600 3.1 (20.0) 10.2 (22.5) Standard VP516A30T915 (36) 240/240 ➂ 11500 3.1 (20.0) 12.2 (26.8) Standard VP516A36TAll units in this table are suitable for use up to 982°C (1800°F) maximum surface temperature.➁ Stocked ceramic fiber heaters can be used to make this RAYMAX 2030 heater panel. These are assembly stock units. For those units rated at120VÅ(ac) (code numbers ending in ...T), an alternate 240VÅ(ac) (code numbers ending in ...U) unit is available as a standard design.➂ Dual element unit. Four power terminals provided.How to OrderTo order a stock, assembly stock,or standard heater, specify:• RAYMAX 1220 or 2030• Quantity• Watlow code number• Mounting studs, if desiredNote: 25 mm (1 in.) mounting legsare provided. 76 mm (3 in.) legs areavailable from stock upon request.If stock or standard units do notmeet application needs, Watlow canmanufacture radiant heaters to fitspecial requirements.For made-to-order units, pleasespecify, in addition to previousinformation:• Heated width and length, andoverall size• Total wattage• Voltage, and phases or zonesrequired• Load temperature expectations• Mounting studs, if desired• Mounting legs and leg height,if desired (25 mm (1 in.) isprovided unless otherwisespecified)• Location of terminals• Terminal box, if desired• Thermowell (specify size andlocation if standard end clampis not sufficient)AvailabilityStock: Shipment in one to two daysAssembly Stock: Shipment intwo weeksStandard: Shipment in three tofour weeksMade-to-Order: Consult WatlowThermoforming<strong>Heaters</strong>313