Barrel Heaters - Hasmak.com.tr

<strong>Heaters</strong>Mica StripTermination OptionsPost Terminals (Standard)Long TerminalsButton Terminals19 mm(0.75 in.)25 mm (1 in.)11 mm (0.4375 in.)Post terminals have a threadedlength of 11 mm (0.44 in.) and requireapproximately19 mm (0.75 in).clearance. Specify standardterminals when ordering.Longer terminals with 17.5 mm(0.69 in.) threaded lengths areavailable and require approximately25 mm (1 in.) clearance. Specifylong terminals when ordering.The slotted screw head terminalsrequire only 11 mm (0.44 in.)clearance. Specify buttonterminals when ordering.Three Terminal ConstructionType E—Loose Metal Braided LeadsType C—Metal Overbraid LeadsA third terminal can be added toprovide dual voltage or three-heatoperation. Or, it can be connected tothe sheath for easy grounding.Specify dual voltage or three-heatoperation when ordering.Loose metal braid encloses twofiberglass leads for good abrasionprotection, lead flexibility and wiringconvenience. Leads are 51 mm(2 in.) longer than the braid. Toorder, specify Type E and length.Leads are 51 mm (2 in.) longer thanbraid.Each fiberglass-insulated lead wireexits in a single metal braid from theback of the heater. This arrangementoffers abrasion protection, lead flexibilityand convenient wiring for a neatinstallation. Minimum heater lengthis 140 mm (5.5 in.). Specify Type Cand length when ordering. Leads are51 mm (2 in.) longer than braid.Type H—Flexible Steel Hose Leads(Vertical)Type K—Flexible LeadsGalvanized, flexible steel hose givessuperior mechanical protectionwhere lead abrasion is a particularproblem. Minimum heater length is140 mm (5.5 in.). Specify Type H andlead length when ordering, leads aretypically 51 mm (2 in.) longer thanhose.Two on One (Vertical)Two on One (Horizontal)One on One (Horizontal)Type K has two fiberglass-insulatedleads. These leads can exit one ateach end or both at the same end,so please specify end terminationwhen ordering. Type K is suitable forapplications where lead abrasion isnot a problem. Specify Type Korientation and length when ordering.320