Barrel Heaters - Hasmak.com.tr

TemperatureControllersPPC-2000PPC-207X - Digital Input ModuleThe PPC-207X acceptsinput signals from on-offsensors. The digital inputmodule is available with8 or 16 inputs.PPC-IPS-2 - Power SupplyThe PPC-IPS-2 supplies power to aPPC-2000 system which requires a12 to 28VÎ(dc) power source. Thepower supply also provides 5VÎ(dc)to drive digital outputs on theprocessor module.SpecificationsGeneral• Dimensions: 114.3 mm (4.5 in.) Hx 48.3 mm (1.9 in.) W x 215.9 mm(8.5 in.) D• Mounting: DIN-rail or panel mount• Input voltage: 120/240VÅ(ac),50/60Hz• Output voltage:V1 +5VÎ(dc) at 6 ampsV2 +24VÎ(dc) at 4 amps• Peak current output: 9A @5VÎ(dc); 6A @ 24VÎ(dc)• Agency approvals: CE, UL ® andC-UL ® recognizedSpecificationsGeneral• Input status LEDs• Maximum number of modulesper system: 4Input• Number: 8 or 16• Input range: 70-120VÅ(ac)± 10 percent (PPC-2070/1),12-24Vı(ac/dc) ± 10 percent(PPC-2072/3)• Input response time: 32ms,64 ms 12-20VÅ(ac)• Logic levels: < 20VÅ(ac) = Low,>70VÅ(ac) = High (PPC-2070/1);< 3VÎ(dc) = Low, >10VÎ(dc)= High (PPC-2072/3)PPC-2010 - Processor ModuleOrdering InformationTo order, <strong>com</strong>plete the model number on the right with the information below.The PPC-2010 Processor Module includes ANAWIN3-CNFsoftware for PPC-2000 configuration only and a TB50-SCSIdigital I/O terminal board. A PPC-2000 system can have upto 10 modules.Processor Module (with TB50)Digital I/O Cable(Cable from module to terminal board)1 = 3 foot cable (CA-SCSI-3)2 = 6 foot cable (CA-SCSI-6)Communication Cable(Cable between processor and host <strong>com</strong>puter)1 = 10 foot EIA/TIA-232 cable,Handset plug to DB9F (CA-232-DB910)2 = 25 foot EIA/TIA-232 cable,Handset plug to DB9F (CA-232-DB925)3 = 50 foot EIA/TIA-232 cable,Handset plug to DB9F (CA-232-DB950)4 = 10 foot EIA/TIA-232 cable,Handset plug to DB25F (CA-232-DB2510)5 = 25 foot EIA/TIA-232 cable,Handset plug to DB25F (CA-232-DB2525)6 = 50 foot EIA/TIA-232 cable,Handset plug to DB25F (CA-232-DB2550)A= EIA/TIA-485 terminal block with 2 foot cableB= EIA/TIA-485 terminal block with 4 foot cablePower Supply(DC power for the PPC-2000)0 = No power supply (customer provides own supply)2 = PPC-IPS-2 supply; 24VÎ(dc) @ 4 A and 5VÎ(dc) @ 6AP P C - 2 0 1 0 -262