Barrel Heaters - Hasmak.com.tr

W A T L O WTubular/ImmersionImmersion <strong>Heaters</strong>for the PlasticsIndustryThe temperature of mold surfaces,with which molten plastic <strong>com</strong>es intocontact, changes as the roomtemperature changes. In manylocations this temperature can varyas much as 30 degrees; summer towinter months experiencing evengreater differences. Mold controlunits provide consistent moldtemperatures, regardless of theseason. Processors can increase setpoint as ambient temperatureschange, resulting in improved partquality and cycle times. Watlow hasan extensive offering of heaters formold control systems.Watlow presents an easy-to-use,cross-reference for process heatersin the plastics industry. This is a<strong>com</strong>plete listing of immersion heaterproducts from many OEMs servingthis market. Watlow’s extensiveexperience in this industry hasallowed the <strong>com</strong>pilation of this indexand to manufacture over 60 of themost popular designs available fromstock. The cross-reference chartincludes over 250 designs withflange sizes ranging from 89 mm(3.5 in.) square up to 203 mm (8 in.)with a 150 pound ANSI rating.Performance Capabilities• Watt densities to 15.5 W/cm 2(100 W/in 2 )• Wattages to 100 kilowatt• UL ® and CSA <strong>com</strong>ponentrecognition to 480VÅ(ac) and600VÅ(ac) respectively• Incoloy ® sheath temperatures to870°C (1600°F)• 304 stainless steel sheathtemperatures to 650°C (1200°F)• Steel sheath temperatures to400°C (750°F)• Copper sheath temperatures to175°C (350°F)Features and BenefitsQuick delivery: Same day forstock units; next day for assemblystock units• Minimal down timeWide variety of OEM and<strong>com</strong>petitor part numbers in onelocation for quick reference• Single source supplier for manyOEM applications• Save time and money with originalpart manufacturerFull product descriptions availableupon request• Accurate information from originalheater manufacturer• Proper heater replacement for theOEM equipmentApplications• Mold temperature control unitsInjection MoldingTubular/ImmersionIncoloy ® is a registered trademarkof the Special Metals Corporation.UL ® is a registered trademark of theUnderwriter’s Laboratories, Inc.151