13.07.2015 Views

Barrel Heaters - Hasmak.com.tr

Barrel Heaters - Hasmak.com.tr

Barrel Heaters - Hasmak.com.tr

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<s<strong>tr</strong>ong>Barrel</s<strong>tr</strong>ong> TemperatureCon<strong>tr</strong>ollers4-, 8-, 16-LoopCLS200Note: Con<strong>tr</strong>oller is configured forthermocouples and -10 to 60mVÎ(dc)linear inputs. For other sensors orderspecial inputs, see below. For analogoutputs order DAC or SDAC modules,see page 179. For easy setup orderWATVIEW software, see page 180.AvailabilityUp to four weeks, depending on<s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>plexity and order releasequantity. Consult factory for details.Ordering InformationTo order, <s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>plete the code number to the right with the information below:2 _ _ - _ _ _ _ _ _ _Number of Channels04 = 4 channel08 = 8 channel16 = 16 channelCon<strong>tr</strong>oller Type1 = Standard EPROM2 = Ex<strong>tr</strong>uder3 = Ramp and soak4 = Enhanced featuresTerminal Block0 = No terminal block accessory1 = 18-pin terminal block (CLS204 and CLS208 only)2 = 50-pin terminal block installed (includes 3 foot SCSI cable)Power Supply0 = No power supply2 = 120/240V~(ac), 50/60Hz power supply adapter(5VÎ[dc], @ 4A, 15VÎ[dc] @ 1.2A) (CE approved)SCSI Cables0 = No SCSI cable (3 foot cable included with 50-pin terminal block)1 = 6 foot SCSI cable2 = 3 foot right angle SCSI cable3 = 6 foot right angle SCSI cableSerial Communication Cables0 = No serial <s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>munications cable1 = 10 foot serial <s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>munications cable (DB-9 female/bare wire)2 = 25 foot serial <s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>munications cable (DB-9 female/bare wire)3 = 50 foot serial <s<strong>tr</strong>ong>com</s<strong>tr</strong>ong>munications cable (DB-9 female/bare wire)Serial Communication Jumper Settings0 = EIA/TIA-2321 = EIA/TIA-4852 = EIA/TIA-485 terminatedSpecial Inputs(Standard unit is configured for thermocouples and -10 to 60 mV linear inputs. For other sensors,order special inputs. See below for ordering ins<strong>tr</strong>uctions. For CLS216 specify two digits, forCLS204 and CLS208 specify one digit.)0 or 00 = Thermocouples and -10 to 60 mV inputs onlyX or XX = Number of current, voltage or RTD inputsC L S S I _ _ - _ _ - _ _Special/Linear Input Type(Not required for thermocouple sensor inputs.)20 = RTD 1: 0.1°, -100.0 to 275.0°C (-148.0 to 527.0°F)Not available on CLS21621 = RTD 2: 1°, -120 to 840°C (-184 to 1544°F)Not available on CLS21643 = 0-10mAÎ(dc)44 = 0-20mAÎ(dc)/4-20mAÎ(dc)50 = 0-100mVÎ(dc)52 = 0-500mVÎ(dc)53 = 0-1VÎ(dc)55 = 0-5VÎ(dc)56 = 0-10VÎ(dc)57 = 0-12VÎ(dc)Start ChannelXX = Channel number XXEnd ChannelXX = Channel number XX172

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!