Barrel Heaters - Hasmak.com.tr

W A T L O W<strong>Barrel</strong> TemperatureControllersSoftware OptionsWATVIEW HMIFeatures and Benefits, con’t.Colorful, animated customoverview screens• Use WATVIEW Developer editionto create custom screens.WATVIEW’s Custom Overviews(COVs) incorporate your graphicimages (such as digital cameraphotos) with real-time data fromthe controllers to make a custominterface. You can also useWATVIEW’s AnaMator program tocreate animated sequences,which can show your actualprocess in action. CustomOverviews created with theDeveloper edition can be usedwith any WATVIEW edition.Superior online help system• Use the online help to navigatethrough setup procedures, obtainspecific help for various Watlowcontrollers, locate contextsensitivehelp or search andbrowse the entire contents. Thisonline help system is a superiorfeature for HMI software and isincluded with each edition ofWATVIEW.SpecificationsSystem Requirements:1. Pentium ® 200MHz processor(depending on operatingsystem)2. 32 MB RAM3. 800 x 600 screen resolution4. 16-bit or higher color palette(“High Color”)5. Communications port capable of19.2 kbaud (16550 UART)6. Microsoft ® -<strong>com</strong>patible pointingdevice (mouse or trackball)7. High-density floppy drive8. 200 MB hard drive space9. CD-ROM drive10.Windows ® 95, 98, NT 4.0, ME,2000 or XPNote: For Windows ® NT 4.0 youmust have 64 MB of RAM.For Windows ® 2000 and XPyou must have 128 MBof RAMControllers Supported:WATVIEW supports the followingcontrollers when equipped with thelisted firmware revision or later:• CLS200 standard, enhanced andextruder (Rev. 3.30), ramp andsoak (Rev. 3.40)• SERIES SD Dual Display(Rev. 1.00)• SERIES SD Dual Display Limit(Rev. 1.00)• MLS300Injection Molding<strong>Barrel</strong> Temperature ControllersPentium ® is a registered trademark of IntelCorporation.Windows ® 95, 98 and NT are registered trademarksof Microsoft Corporation.181