Barrel Heaters - Hasmak.com.tr

<strong>Heaters</strong>RAYMAX 1120Applications andTechnical DataFace Temperature: 595°Cmaximum (1100°F)Wattage: Watt densities up to3 W/cm 2 (20 W/in 2 )Standard Voltage: 120, 240,480VÅ(ac), 1-phase. Balanced3-phase available on unit widthsdivisible by three. Other voltagesare available.Terminals: Non-standard locationsare available. Please specify.Standard Dimensions: ±0.0625 mm(0.0625 in.)Typical Peak Energy Wavelength:3-3.5 micronsSpecificationsHeater Dimensions Min. Max. IncrementsWidth: mm (in.) 25.4 (1) 914.4 (36) 25.4 (1)Length: mm (in.) 152.4 (6) 1778 (70) anyArea: cm 2 (in 2 ) 38.7 (6) 5574.2 (864) anyNote: Less than maximum length x width may exceedmaximum area.Overall Width =Heated Width+ 9.5 mm (0.375 in.)9 mm (0.375 in.)9 mm(0.375 in.)Overall Length =Heated Length+ 31.75 mm (1.25 in.)39 mm (1.5625 in.)38 mm(1.5 in.)22 mm (0.875 in.)AB38 mm(1.5 in.)30 mm(1.1875 in.)Panel Panel Approx.Overall Size mm (in.) Heated Size mm (in.) Watt Density Net Wt. CodeWidth Length Width Length Volts Watts W/cm 2 (W/in 2 ) kg (lbs) Availability No.161.93 (6 3 ⁄8) 641.35 (25 1 ⁄4) 152.4 (6) 609.6 (24) 240 2880 3.1 (20) 2.7 (6) Stock P0624AX050314.33 (12 3 ⁄8) 336.55 (13 1 ⁄4) 304.8 (12) 304.8 (12) 240 2880 3.1 (20) 2.7 (6) Stock P1212AX030314.33 (12 3 ⁄8) 641.35 (25 1 ⁄4) 304.8 (12) 609.6 (24) 240 5760 3.1 (20) 5.4 (12) Stock P1224AX062314.33 (12 3 ⁄8) 1250.95 (49 1 ⁄4) 304.8 (12) 1219.2 (48) 480, 3-phase 11520 3.1 (20) 10.8 (24) Stock P1248AX073Note: • Panels are equipped with terminal box, thermocouple well with bayonet adapter and mounting studs.• Watlow stock radiant panels must be properly applied for safe operation.• Please consult Watlow with your application before ordering.How to OrderTo order your stock RAYMAX heater,specify:• RAYMAX 1120• Quantity• Watlow code numberIf our stock units do not meet yourapplication needs, Watlow canmanufacture RAYMAX heaters toyour special requirements. Formade-to-order heaters, specify thefollowing:300• Heated width and length. Threephasepanels must have widthdivisible by three.• Total wattage of each panel.• Exact voltage and phase. Afive percent variation in voltage atthe oven will cause a 10 percentvariation in power.• Zoning. Indicate dimensionsand wattage of each zone.• Mounting legs or mounting studs,if desired. For studs, give numberand location or indicate standardlocation.• Terminal location if non-standard.• Terminal box or wire raceway, ifrequired.Supplying a drawing with an orderor request for quotation can be veryhelpful in clarifying designinformation.AvailabilityStock: Next day shipmentMade-to-Order: Consult Watlow