Barrel Heaters - Hasmak.com.tr

TemperatureControllersSERIES D8Ordering InformationTo order, <strong>com</strong>plete the code number on the right with the information below.D 8 _ 0 - 0 0 0 0 - _ _ 0 _Number of Loops4 = 4 loop controller8 = 8 loop controllerDigital I/O Terminations0 = TB18 (Screw terminals on the controller)1 = SCSI connector, no terminal board or cable2 = SCSI connector, TB50 terminal board and 3-foot cable3 = SCSI connector, TB50 and 6-foot cable4 = SCSI connector, TB50 and 3-foot right angle cable5 = SCSI connector, TB50 and 6-foot right angle cablePower Supply0 = No power supply1 = CE power supplySpecial Inputs0 = Thermocouples and -10 to 60 mV inputs onlyX = Number of current, voltage and RTD inputsSpecial InputsSpecify an input type for each channel or block of channels that needs factory installedresistors. Include a descriptor in the controller part description in the form specified below foreach special input type. Make sure the number of special inputs specified is equal to thenumber of special inputs in the controller part numberD 8 S I _ _ - _ _ - _ _Special Input Type(Not required for thermocouple sensor inputs)23 = RTD43 = 0-10mAÎ(dc)44 = 0-20mAÎ(dc)/4-20mAÎ(dc)50 = 0-100mVÎ(dc)52 = 0-500mVÎ(dc)53 = 0-1VÎ(dc)55 = 0-5VÎ(dc)56 = 0-10VÎ(dc)57 = 0-12VÎ(dc)Start ChannelXX = Channel Number XXEnd ChannelXX = Channel Number XXAvailabilityUp to four weeks, depending on<strong>com</strong>plexity and order releasequantity. Consult factory for details336