Barrel Heaters - Hasmak.com.tr

W A T L O WDie andFormer <strong>Heaters</strong>Mica StripOptionsCeramic Terminal CoversCeramic terminal covers are aconvenient, economical way toprovide safety. Covers are sized forstandard 11 mm (0.44 in.) long postterminals, that require approximately19 mm (0.75 in.) clearance.The clearance, with ceramiccover cap, is 23.1 mm (0.91 in.).Excluding the thickness of theheater, the clearance is 19 mm(0.75 in.). Screw thread size is10-24. To order, specify Watlowcode number Z-4918 and quantity.90 mm(3.5 in.)37 mm(1.4375 in.)43 mm(1.6875 in.)Metallic Terminal BoxA high quality metallic terminal boxis welded to the heater sheath. Unitswith tandem terminals must be atleast 38 mm (1.5 in.) wide. Units withparallel terminals must be at least108 mm (4.25 in.) wide. Minimumlength is 108 mm (4.25 in.) withoutmounting holes or 159 mm (6.25 in.)with holes. When ordering specifyterminal box.AccessoriesClamping VariationsClamping Bars24.6 mm(0.9687 in.)88.9 mm(3.5 in.)6.7 mm (0.2656 in.) Dia.24.6 mm(0.9687 in.)6.7 mm(0.2656 in.)38.1 mm(1.5 in.)6.4 mm (0.25 in.)For maximum life and efficientoperation, strip heaters must befirmly clamped to the part beingheated. Clamping bars 90 mm(3.5 in.) wide can be used to clampstrips with a maximum width of 76mm (3 in.). Watlow re<strong>com</strong>mendsclamping every 150 mm (6 in.).Specify code number MB101-1 andquantity when ordering clampingbars.ExtrusionDie and Former <strong>Heaters</strong>231