Barrel Heaters - Hasmak.com.tr

W A T L O WHot RunnerNozzle <strong>Heaters</strong>FIREROD CartridgeLA StockRight Angle OptionsMinimum No-HeatLA Right Angle LeadsLA right angle leads are used inapplications with a high degree offlexing and when space limitationsare critical. Stranded lead wires areconnected internally (swaged-in)and exit at a 90 degree angle at theend of the heater.To order, specify option code R.To order right angle leads withTeflon ® leads and seals, specifyoption code B.Minimum No-Heat RequiredinchesDia. 1 3 1 5⁄4 ⁄8 ⁄2 ⁄8Inches11⁄165⁄811⁄1611⁄16Note: Option is not available on6 mm (0.25 inch) diameter.3⁄411⁄16Minimum No-HeatMinimum No-Heat;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@LA Right AngleStainless Steel HoseLA right angle stainless steel hose isprovided for wiring convenience.Like the LA straight stainless steelhose, it protects leads from abrasionagainst sharp edges. Unlessspecified, 305 mm (12 in.) hose issupplied. Leads are 51 mm (2 in.)longer than hose.LA Right AngleStainless Steel BraidLA right angle stainless steel braid isprovided for wiring convenience.Like the LA straight braid, it protectsleads from abrasion against sharpedges. Unless specified, 305 mm(12 in.) braid is supplied. Leads are51 mm (2 in.) longer than braid.To order, specify option code W.Minimum No-Heat RequiredinchesDia. 1 3 1 5⁄4 ⁄8 ⁄2 ⁄8Inches N/A 1 1 1 1 1 ⁄8Note: Option is not available on6 mm (0.25 in.) diameter.To order, specify option code Y.Minimum No-Heat RequiredinchesDia. 1 3 1 5⁄4 ⁄8 ⁄2 ⁄8Inches N/A 1 1 1 1 1 ⁄8Note: Option is not available on6 mm (0.25 in.) diameter.3⁄43⁄4Injection MoldingHot Runner Nozzle <strong>Heaters</strong>Minimum No-HeatLA Right Angle Stainless SteelHose with Teflon ® Leads and SealLA right angle stainless steel hosewith Teflon ® leads and seal providesthe ultimate <strong>com</strong>bination of abrasionprotection and a moisture resistantseal with wiring convenience. Unlessspecified, a 305 mm (12 in.) hose issupplied. Leads are 51 mm (2 in.)longer than hose.Minimum lead end no-heat requiredis 38 mm (1.5 in.). Option adds32 mm (1.25 in.) to overall length onstock units.To order, specify option code M.Note: Option is not available on6 mm (0.25 in.) diameter.Minimum No-Heat;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@;;;;;;;@@@@@@@LA Right Angle Stainless SteelBraid with Teflon ® Leads and SealLA right angle stainless steel braidwith Teflon ® leads and seal providesWaltow’s most flexible leadprotection and moisture resistantTeflon ® seal with wiringconvenience. Unless specified, a305 mm (12 in.) braid is supplied.Leads are 51 mm (2 in.) longer thanthe braid.Minimum lead end no-heat requiredis 38 mm (1.5 in.). Option adds32 mm (1.25 in.) to overall length onstock units.To order, specify option code A.Note: Option is not available on6 mm (0.25 in.) diameter.81