Barrel Heaters - Hasmak.com.tr

Hot RunnerNozzle <strong>Heaters</strong>Metric FIRERODCartridgeTermination OptionsContinuedMinimum No-Heat Length25 mm(1 in.)Silicone Rubber Seal and LeadsSilicone rubber seal and leadsprotect the heater against moisture/contamination from lubricating oil,cleaning solvents, plastic material orfumes and organic tapes. This sealis effective to 230°C (450°F) undercontinuous operation. Epoxy pottingfor up to 260°C (500°F) forcontinuous operation is availableupon request.Please note, when ordering thisoption, that a 25 mm (1 in.) minimumunheated section is required to allowfor construction. Additional no-heatmay be required to keep the sealbelow effective temperatures. Toorder, specify silicone or epoxyseal and leads and lead length.Right Angle (Swaged-in) LeadsSwaged-in LeadsNo-HeatLengthNo-Heat SectionNo-heat sections are re<strong>com</strong>mendedin applications where leads may beexposed to excessive heat, thusrequiring a cooler lead end. Also usewhen heat is not required along theentire length of the metric FIREROD.Unheated extensions are availableon all diameters with both pin styleand swaged-in leads. To order,specify no-heat section and lengthof no-heat.No-HeatLength108