Barrel Heaters - Hasmak.com.tr

W A T L O WTemperatureControllers16-, 32-LoopMLS300Serial Interface• EIA/TIA-232 or EIA/TIA-485Baud Rate• 2400, 9600 or 19200, userselectableInput Module OptionsChoose the input moduleappropriate for the application:• AIM316 and AIM332 providesscrew terminations for 16 or 32sensors• CIM316 and CIM332 providesDB-50 connector terminations for16 or 32 sensors in a <strong>com</strong>pact sizeCommunication Protocol• Modbus RTULine Voltage/Power• 15 to 24VÎ(dc) ± 3VÎ(dc) @ 1A25 mm(1.00 in.)188 mm(7.40 in.)41 mm*(1.60 in.)Agency Approvals• UL ® , C-UL ® Listed: UL ® 916,Standard for Energy ManagementEquipment50 mm(1.96 in.)• CE Mark: ElectromagneticCompatibility (EMC) Directive89/336/EEC*15 mm (0.60 in.) withRight Angle SCSI ConnectorFirmware OptionsChoose firmware with the featuresneeded for the application:• Standard—includes closed-loopPID control, auto-tune, alarms, jobmemory and failed sensordetection• Extruder— includes the standardfirmware features, with PID controlspecifically adapted for plasticextruders• Enhanced Features— includesthe standard firmware featureswith the addition of processvariable retransmit, remote analogset point, cascade control, ratiocontrol and differential controlalgorithms. Each channel can beconfigured for standard PIDcontrol or one of the other controlalgorithms. Each channel ofcascade control or remote analogset point requires two controllerchannels. Unused control outputson any channel can beconfigured for retransmit50 mm(1.96 in.)MANAUTOProcessor Module (Side)LOOPALARMCHNGSPPROCESSSETPOINTYESUNITSSTATUSNOOUT%BACKRAMPSOAKALARMACKENTER96 mm(3.78 in.)Processor Module (Front)ExtrusionTemperature Controllers255