Barrel Heaters - Hasmak.com.tr

Die andFormer <strong>Heaters</strong>MI StripApplications andTechnical DataSpecificationsWidth: 25.4, 38.1, 50.8 mm(1, 1.5 and 2 in.)Tolerance: ±.0312Length: 205 to 760 mm(8 to 30 in.)Tolerance: ±.125Terminations:25.4 mm (1 in.) wide—post terminals one-on-one38.1 to 50.8 mm (1.5 to 2 in.)—post terminals two-on-one25.4 mm (1 in.) Wide12.7 mm(0.5 in.)22.2 mm(0.875 in.)12.7 mm(0.5 in.)38.1 mm(1.5 in.)47.6 mm(1.875 in.)TYPE 110-24 Screw ThreadHeated Area22.2 mmTYPE 2(0.875 in.)9.1 mm (0.36 in.) D, 2 Places 12.7 mm(0.5 in.)Heated Area38.1 mm(1.5 in.)47.6 mm(1.875 in.)12.7 mm(0.5 in.)38.1–50.8 mm (1.5–2 in.) WideAll WidthsTYPE 312.7 mm(0.5 in.) 10-24 Screw Thread18.2 mm(0.715 in.)10-24 Screw Thread4.0 mm (0.1562 in.)19.1 mm (0.75 in.)22.2 mm(0.875 in.)12.7 mm(0.5 in.)Heated AreaTYPE 49.1 mm (0.36 in.) D, 2 Places7.9 mm(0.3125 in.)19.1 mm (0.75 in.)38.1 mm(1.5 in.)47.6 mm(1.875 in.)Heated Area33.3 mm(1.3125 in.)12.7 mm(0.5 in.)Stock List (Parallel Terminals) Type 3 and 4Width Length Volts Power Watt Density Approximate Type Code No.mm (in.) mm (in.) (Watts) W/cm 2 (W/in 2 ) Net. Wt.kg (lbs)38.1 (1.5) 203.2 (8) 120 500 7.4 (48) 0.15 (0.3) 3 MS1J8AS138.1 (1.5) 203.2 (8) 240 500 7.8 (50) 0.15 (0.3) 3 MS1J8AS338.1 (1.5) 304.8 (12) 120 350 4.0 (26) 0.2 (0.5) 4 MS1J12AV2 ➀38.1 (1.5) 304.8 (12) 240 350 4.0 (26) 0.2 (0.5) 4 MS1J12AV3 ➀38.1 (1.5) 304.8 (12) 120 800 7.6 (49) 0.2 (0.5) 3 MS1J12AS138.1 (1.5) 304.8 (12) 240 800 7.6 (49) 0.2 (0.5) 3 MS1J12AS238.1 (1.5) 457.2 (18) 120 1000 6.2 (40) 0.3 (0.8) 3 MS1J18AS138.1 (1.5) 457.2 (18) 240 1000 6.2 (40) 0.3 (0.8) 3 MS1J18AS2➀ Denotes units with mounting holes. Mounting holes are 9.14 mm (0.36 in.) in diameter, and are intended for use with 6.35 mm (0.25 in.) bolts.Centers of mounting holes are located 12.7 mm (0.5 in.) from the ends of the heater.Note: Type 1 & 2 are made-to-order only.224